Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Darkness Delta


User Tag List

+ Reply to Thread
Page 1 of 3 123 LastLast
Results 1 to 15 of 36
Like Tree10Likes

Thread: Stirling Model P20 Bullpup conversion

  1. #1
    Member
    Join Date
    Mar 2014
    Location
    Kapiti
    Posts
    68

    Stirling Model P20 Bullpup conversion

    This is my Stirling Model P20 conversion, using one of the many Steyr BB guns available on TradeMe. I paid $19 for this broken one, then gutted it using my Dremel knock-off.


    Name:  DSCF0001.jpg
Views: 2624
Size:  737.2 KBName:  DSCF0013.jpg
Views: 2869
Size:  758.8 KBName:  DSCF0012.jpg
Views: 3221
Size:  598.0 KB

    It doesn't need too much modifying to make it fit.

    Name:  DSCF0017.jpg
Views: 2808
Size:  633.6 KB

    This one uses the Stirling's slip on silencer and a bipod foregrip, which replace the fake ones from the BB gun.

    Name:  DSCF0030.jpg
Views: 3036
Size:  650.5 KB

    A couple of hours work with the dremel for both halves of the clam-shell. If I do any more I will be much quicker now I've worked out where everything fits.

    Name:  DSCF0034.jpg
Views: 1978
Size:  432.8 KB

    Name:  DSCF0010.jpg
Views: 2081
Size:  632.0 KB

    This is a piece of stainless steel from an ATM cash canister guide rail to keep the trigger linkages straight.

    Name:  DSCF0017.jpg
Views: 2822
Size:  540.4 KB

    The trigger linkages are two welding rods attached from the BB trigger (a spring goes behind it) to the Stirling trigger.

    Name:  DSCF0018.jpg
Views: 4314
Size:  776.1 KB

    It's not the most practical piece of kit but I reckon it looks a bit cooler than the original. I may possibly modify the BB mag so the Stirling one fits inside it but then I would have to register it as an E-cat weapon.

    Name:  DSCF0003.jpg
Views: 1996
Size:  695.2 KB

    This measures 31 inches with the silencer, 30.5 inches without.


    Steve
    Toby, big_foot and NAKED_GOOSE like this.

  2. #2
    Member
    Join Date
    Jan 2013
    Location
    Auckland
    Posts
    588
    ATM cash cannister rail? As long as it isn't ANZ

    Thats awesome, I've been reading about guys doing that overseas, and its on my rainy day project list
    Keep the thread updated if you make some more changes
    vinz likes this.

  3. #3
    By Popular Demand gimp's Avatar
    Join Date
    Dec 2011
    Location
    The Big H
    Posts
    8,886
    No linkage to the charging handle?

  4. #4
    Member
    Join Date
    Mar 2014
    Location
    Kapiti
    Posts
    68
    No, it was a quick and dirty build just to see how it would work. It still charges ok but would be easier with an extension. It may also require some steel around the ejector port - at present it's just ABS plastic but fortunately it is in an area where it's already nicely shaped. I'll see how it holds up after a few hundred rounds.

  5. #5
    Member
    Join Date
    Mar 2014
    Location
    Kapiti
    Posts
    68
    Back when I was wage-donkeying for Trustbank/Westpac they got rid of all the old aluminium locking cash canisters and replaced them with smaller plastic ones when we changed to plastic notes. I scored a bunch of them, knowing that a green bank would want to see them recycled into weapons.
    Moa Hunter likes this.

  6. #6
    5.56 AzumitH's Avatar
    Join Date
    Dec 2011
    Location
    Hamilton
    Posts
    366
    That's cool as fuck, and I want one. Unfortunately it's already E-Cat, as the Steyr grip is considered free standing. Look closely at the GC A-Cat Steyrsm they have another piece in behind the handle.

  7. #7
    res
    res is offline
    Member res's Avatar
    Join Date
    Apr 2014
    Location
    Quebec
    Posts
    3,379
    Quote Originally Posted by AzumitH View Post
    That's cool as fuck, and I want one. Unfortunately it's already E-Cat, as the Steyr grip is considered free standing. Look closely at the GC A-Cat Steyrsm they have another piece in behind the handle.
    Debatable, I have had two different answers two this from two AOs in the last month.
    Using Tapatalk

  8. #8
    Member Dynastar27's Avatar
    Join Date
    Jan 2014
    Location
    Papakura
    Posts
    1,059
    thats awesome as
    OPCz

    If in doubt double tap

  9. #9
    By Popular Demand gimp's Avatar
    Join Date
    Dec 2011
    Location
    The Big H
    Posts
    8,886
    Quote Originally Posted by AzumitH View Post
    That's cool as fuck, and I want one. Unfortunately it's already E-Cat, as the Steyr grip is considered free standing. Look closely at the GC A-Cat Steyrsm they have another piece in behind the handle.
    not by the letter of the regulations

  10. #10
    Member
    Join Date
    Mar 2014
    Location
    Kapiti
    Posts
    68
    I'm hoping that it's not considered "free standing" - if it didn't have the front piece on the non-free-standing grip then it would be too flimsy. Maybe I will register it as E-cat anyway so I can add the BB mag into the design for a better overall look - more like a proper Steyr.

    I do think it's important to challenge as many regs as possible, especially if they are being interpreted unfairly. As it is you've got to wonder how long before the media start their next anti-gun beat-up now that they appear to have won their crusade against legal highs. Maybe they will pick on home-brewers, home-mechanics or home builders next though.

  11. #11
    Member Beavis's Avatar
    Join Date
    Dec 2011
    Location
    Taupo
    Posts
    4,833
    I've been thinking of doing this with an FN SCAR or something. A P90 or FS2000 build would be A cat, as long as you kept it over 762mm

  12. #12
    Member
    Join Date
    Jan 2013
    Location
    Auckland
    Posts
    588
    Quote Originally Posted by Beavis View Post
    I've been thinking of doing this with an FN SCAR or something. A P90 or FS2000 build would be A cat, as long as you kept it over 762mm

    The P90 is what I was going to base my build on. Unfortunately there seem to be no Airsoft versions in the country.
    There is an off-the-shelf kit for the 10/22 from High Tower Armory, but its still a 10/22 inside

  13. #13
    5.56 AzumitH's Avatar
    Join Date
    Dec 2011
    Location
    Hamilton
    Posts
    366
    I agree with being prepared to fight the good fight and all that, but you better be really prepared.

    Is designed to be gripped by the whole or most of the trigger hand of a person firing the firearm; and
    Is (if any trigger guard is disregarded) structurally connected to the firearm at only one point; and
    When deployed, protrudes from the firearm in a direction that is closer to being perpendicular to the barrel than to being parallel to it;
    I recall an image being posted on this forum even which singled out the AUG as being considered to have a free standing grip. I think the general police opinion is that the bit in front of the grip is a trigger guard only and doesn't count as two points of contact. My mate dropped an SKK into a bullpup stock with a grip identical to the AUG, and he has been informed that it is an E-Cat configuration.

    Obviously its another case of "depends who you ask", but I would not sit back and relax with something in an AUG stock that wasn't on E, unless it was bolt action

    But I don't mean to shit in your cereal OP, I would love to do something similar with mine. What brand airsoft gun was it? Might keep an eye open.

  14. #14
    res
    res is offline
    Member res's Avatar
    Join Date
    Apr 2014
    Location
    Quebec
    Posts
    3,379
    The police seem to have it on for bullpup a full stop.

    I can see why the AUG is debatable but I also have a 10/22 in a redjacket stock that is clearly attached at the back of the grip as well as having a clearly defined trigger guard. Had one AO tell me that because it's a bullpup it was E cat. It's not and even J Green agrees. Still waiting on his reply about the AUG
    Using Tapatalk

  15. #15
    Member
    Join Date
    Mar 2014
    Location
    Kapiti
    Posts
    68
    But I don't mean to shit in your cereal OP, I would love to do something similar with mine. What brand airsoft gun was it? Might keep an eye open.[/QUOTE]

    TradeMe seller Waynelee has been selling this model and various others for over six months now. Here is one of his other listings on $1 reserve:

    *FULL SIZE M8 STEYR ASSAULT RIFLE - REPLICA $1 RES | Trade Me

    I got about half a dozen of them to play around with, including MP5s. I've also got a pile of various model .22 semi-autos for fiddling with too.

 

 

Similar Threads

  1. I want a Stirling Rifle ?
    By ChrisF in forum Firearms, Optics and Accessories
    Replies: 21
    Last Post: 28-12-2022, 09:18 AM
  2. what bullpup would you pick ?
    By turner nz in forum Firearms, Optics and Accessories
    Replies: 72
    Last Post: 30-10-2014, 07:18 PM
  3. Help Wanted Reg : Stirling Model 1500 .22Mag
    By seano in forum Firearms, Optics and Accessories
    Replies: 8
    Last Post: 09-01-2014, 02:38 PM
  4. Importing a bullpup stock from the states
    By Bill999 in forum Firearms, Optics and Accessories
    Replies: 21
    Last Post: 09-12-2013, 03:21 PM
  5. red jacket firearms ZK-22 bullpup 10/22 stock?
    By quentin950 in forum Firearms, Optics and Accessories
    Replies: 7
    Last Post: 21-09-2013, 11:53 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!