Thread: Stewart Island police

Originally Posted by timattalon

No- Dont...they are a nightmare to get back in......

As above, don’t do it unless you really need to,but the following may help. Read Browning instructions first.
Then “Remove the lever assembly as a whole, insert go guage or fully sized case into the chamber, insert the bolt and push it fully home, the head will rotate into the locked position, install the lever group in the locked position.
If your headspace is out it was always out because the lugs to chamber set your headspace, not the gears, they set your timing where a full tooth on the gears goes from unable to close, to unable to rotate and lock the bolt head.”