If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed.
Seriously though, I've had my 500 for about 10 years, it was second hand when I got it and I've put thousands of rounds through it without a single malfunction that I can remember. Never had the a failure to extract. Getting shells out of the tube is usually a matter of pressing one of the interupters, then press the other and a shell pops out, that works most of the time. If I were worried about unloading without a round ever going into the chamber I could pull the pump back so one pops onto the lifter, then tilt the gun to sling said round out of the ejection port. Mine's as loose, rattley, and sloppy as you'll find on a worn-in pump action. I'd wager most starting getting that way after the first 2000 rounds or so. I wouldn't call the action bars weak as they've never failed, and the guys at the pistol club always remark how fast I can fire and cycle mine, but then again it probably comes down to practice............. I've been single for a long time.
lets not confuse the maverick 88 with the latter better put together 500.s of the last few years.
i dont want to belay the point but ive never hads a 870 forend go twisty
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!
Bookmarks