My Snider dies set fits in a standard 7/8" reloading press The sizer on left screws in from below and stops at the small bottom shoulder Works well Plus neck flaring die Seating die and case...
Liked On: 27-07-2022, 03:32 PM
K31 swiss stripper clips
Liked On: 26-07-2022, 06:29 PM
Ron Spomer has a podcast and a youtube channel
Liked On: 21-07-2022, 06:27 PM
This threads a bit old , but here's another oldy but a goody to get the juices flowing for those us us that like them , 3006 made in 1923 with factory fitted scope 201762
Liked On: 20-07-2022, 04:08 PM
8/9 October
Liked On: 20-07-2022, 12:50 PM
The barrel on mine was seriously rusted bore, would only group with one type of bullet,(kind of group) Our club gunsmith obtained a new barrel for mine basically a direct replacement for a kar98 he...
Liked On: 17-07-2022, 10:34 PM
For quite a while I’ve wanted to make a lightweight 223. With budgets never extending to a beautiful stock from one of the carbon stock guru’s like the late Ken. I’ve had a lot to do with...
Liked On: 10-07-2022, 06:47 PM
Buying what you use or plan to use in bulk: Prudent Buying what you don't intend to use: Hoarding
Liked On: 10-07-2022, 01:53 PM
And here is the prediction for your 45 gn of 760 load: Cartridge : 8 x 60 S Bullet : .323, 150, Hornady SP 3232 Useable Case Capaci: 66.315 grain H2O = 4.306 cm³ Cartridge...
Liked On: 01-07-2022, 09:32 PM
Here is some Q/L data for 760: Cartridge : 8 x 60 S Bullet : .323, 150, Hornady SP 3232 Useable Case Capaci: 66.315 grain H2O = 4.306 cm³ Cartridge O.A.L. L6: 3.291 inch =...
Liked On: 01-07-2022, 09:32 PM
Not all you read about the 8x57 is based on fact - aAmerican gun writers have a lot to answer for. I have a 1920s (probably) Kettner 8x57 barrel fitted to a Brno action, it slugs at .320 and shoots...
Liked On: 01-07-2022, 09:17 PM
I used to have a Sako 8x60 (on a FN mauser action, before Sako made their own). mine loved 196 gn. look at American 8mm-06 loading data and compare it to European 8x57 data to get in the ballpark on...
Liked On: 01-07-2022, 05:52 PM
I’ve been thinking, there are questions about how far is it ethical to shoot at animals, what caliber should I use for…@gimp set up a shooting challenge that proves your rifle, this it a hunting...
Liked On: 27-06-2022, 10:55 AM
Shaping is now completed, and on to finish sanding ready for the first coat of oil. Really happy with how it shaped up. These little actions make for a very slim light little rifle. Hopefully the...
Liked On: 24-06-2022, 10:52 PM
I've been playing around with some reduced recoil loads for various rifles of late, due to my 8-year-old stepping up from 22lr, 17 cal and 223 etc getting ready to shoot his first medium game...
Liked On: 20-06-2022, 08:39 PM