-BW-
Member

482 Likes

Page 24 of 33 First ... 101112131415161718192021222324252627282930313233 Last

• Jump to page:

1. 
   Grasshoppa liked post by -BW- On thread : 3D Printing

   Plastic ‘blocks’ that could be used inside old Ammo boxes, to replace the cardboard dividers and styrofoam blocks. I’d use them for reloads that are stored inside the old Norma and PPU boxes.

   Liked On: 26-07-2022, 02:19 PM

2. 
   Husky1600 liked post by -BW- On thread : 3D Printing

   Plastic ‘blocks’ that could be used inside old Ammo boxes, to replace the cardboard dividers and styrofoam blocks. I’d use them for reloads that are stored inside the old Norma and PPU boxes.

   Liked On: 25-07-2022, 09:29 PM

3. 
   Micky Duck liked post by -BW- On thread : 3D Printing

   Plastic ‘blocks’ that could be used inside old Ammo boxes, to replace the cardboard dividers and styrofoam blocks. I’d use them for reloads that are stored inside the old Norma and PPU boxes.

   Liked On: 25-07-2022, 07:50 PM

4. 
   Micky Duck liked post by -BW- On thread : Guns in Caravans

   I know someone who lives in a caravan and has a lockbox installed, bolted to the structure of the caravan. It’s all good. As mentioned, get your AO to give it a thumbs up so you don’t run into any...

   Liked On: 19-07-2022, 09:37 PM

5. 
   Nasty Factory Trigger liked post by -BW- On thread : H4895 in 223

   4895 is also very close to Win748 which is fine in 223. I use 25gr of win 748 or Belmont 748 (or Belmont Action Rifle aka 747) with 69gr bullets. As a broad guide: Powder equivalents – ADI World...

   Liked On: 18-07-2022, 08:46 PM

6. 
   Micky Duck liked post by -BW- On thread : The 8x60 S

   I haven't yet devised a method of balancing a water filled case on the scales without it falling over. I will consume some more beer tonight and see what I can finagle. Edit : Ok I just needed...

   Liked On: 15-07-2022, 09:15 PM

7. 
   Micky Duck liked post by -BW- On thread : The 8x60 S

   Since I parked up my .256Newton loading due to the rifle having a cracked stock, I haven’t had an obscure caliber to play with until I picked up a Brno Model 21 in 8x60S. The great thing about 8x60...

   Liked On: 15-07-2022, 09:14 PM

8. 
   foxhound liked post by -BW- On thread : 8mm mauser, AR2209

   I am using Win 760 - which is very close to 2209 - in my 8x60. My current test batch is from 47-52gr and will maybe go a little higher, until I’m close to 2700fps with 150gr, or until the recoil...

   Liked On: 15-07-2022, 01:46 PM

9. 
   Fisherman liked post by -BW- On thread : Stock repairs done the right way

   I recently took my Brno to Hunter_Nick in the hope he could repair the modified stock where someone had previously fitted a side mount scope. Not only did he do a fantastic job of fixing the wood, he...

   Liked On: 09-07-2022, 12:27 PM

10. 
    bumblefoot liked post by -BW- On thread : H4895 in 223

    4895 is also very close to Win748 which is fine in 223. I use 25gr of win 748 or Belmont 748 (or Belmont Action Rifle aka 747) with 69gr bullets. As a broad guide: Powder equivalents – ADI World...

    Liked On: 08-07-2022, 05:21 PM

11. 
    BSA270 liked post by -BW- On thread : Stock repairs done the right way

    I recently took my Brno to Hunter_Nick in the hope he could repair the modified stock where someone had previously fitted a side mount scope. Not only did he do a fantastic job of fixing the wood, he...

    Liked On: 07-07-2022, 10:23 PM

12. 
    Hunter_Nick liked post by -BW- On thread : Stock repairs done the right way

    I recently took my Brno to Hunter_Nick in the hope he could repair the modified stock where someone had previously fitted a side mount scope. Not only did he do a fantastic job of fixing the wood, he...

    Liked On: 07-07-2022, 12:25 PM

13. 
    Mathias liked post by -BW- On thread : Stock repairs done the right way

    I recently took my Brno to Hunter_Nick in the hope he could repair the modified stock where someone had previously fitted a side mount scope. Not only did he do a fantastic job of fixing the wood, he...

    Liked On: 06-07-2022, 08:27 AM

14. 
    20 Bore liked post by -BW- On thread : Stock repairs done the right way

    I recently took my Brno to Hunter_Nick in the hope he could repair the modified stock where someone had previously fitted a side mount scope. Not only did he do a fantastic job of fixing the wood, he...

    Liked On: 05-07-2022, 09:38 PM

15. 
    Moa Hunter liked post by -BW- On thread : Stock repairs done the right way

    I recently took my Brno to Hunter_Nick in the hope he could repair the modified stock where someone had previously fitted a side mount scope. Not only did he do a fantastic job of fixing the wood, he...

    Liked On: 05-07-2022, 08:53 PM

Page 24 of 33 First ... 101112131415161718192021222324252627282930313233 Last

• Jump to page: