Greetings Niceandfar, Agree with the bulk of the above BM8208, AR2206H and AR2208 will all do the job as long as you can fit enough AR2208 in the case. Regarding AR2206 and AR2206H. AR2206 appeared...
Liked On: 25-02-2020, 09:30 PM
Well its all about mitigating risk.....I do that so the primers don't explode prematurely in my hand.....just kidding....!
Liked On: 25-02-2020, 09:27 PM
As mauser 308 said Flat base bullets set up in the rifling better especially in a worn throat thats why they perform so well. At the ranges you are considering there is no advantage to be had from...
Liked On: 25-02-2020, 03:43 PM
nore did I 6 months ago, now I think it is the best thing ever- the v3 has a to the kernel load ready for me every time I reach for it no mater how fast I try and go. only loaded just over a thousand...
Liked On: 23-02-2020, 09:55 PM
I can tell you these are VERY accurate rifles. Iv had the pleasure of setting up and shooting one. Our demo one in .308 will shoot 1/4" groups at 100m with the basic Sako gamehead soft point...
Liked On: 22-02-2020, 02:54 PM
Yeh I’ve always found the GK accurate and possibly the Pro hunter even more so.
Liked On: 22-02-2020, 02:52 PM
Big fan of.6.5s but 30cal definitely better in the Bush.
Liked On: 21-02-2020, 09:53 AM
Hey Ryan, you sold me a scope a while back eh? Im guessing you are from the south of the south? Man, for the opportunity to knock over a couple of critters id go for a drive and lend a hand for...
Liked On: 20-02-2020, 02:41 PM
Appreciate all the great info, havent been on here for a few days so just getting back to you all. I'll start with a formal greeting. My name is Ron Lee and I'm from a smaller population area in...
Liked On: 18-02-2020, 04:44 PM
Mathias so far I’ve been impressed with them, 1 fallow and 5 reds, from 20yds to 250, shoulder shots have all exited, more research next week hopefully
Liked On: 13-02-2020, 11:18 PM
I thought I invented that amazing Amax technique but alas... Sent from my iPhone using Tapatalk
Liked On: 13-02-2020, 11:35 AM
Love in-line hand dies. Simple yet very effective, however no longer popular as everyone uses a press nowadays. The good old lee loader works off the same principle. Got an old L.E Wilson in line...
Liked On: 12-02-2020, 12:25 PM
Yep, always done it. And likewise, works sometimes. A lot of things have to be correct/true before seating projectile ie neck runout, consistant beck wall thickness. Don't then expect your seating...
Liked On: 09-02-2020, 11:00 PM
No, not since 1 Dec 2019 No gst unless seller has been required to register for gst by nz govt and to collect on behalf. If seller hasn't been required to register (turnover less than NZ $65k) no...
Liked On: 08-02-2020, 10:18 AM
Now I always used to be a manual lover and auto hater but last year bought a new auto diesel.....at the time mainly due to injury as I couldnt change gear with my left hand. Having now had it a...
Liked On: 07-02-2020, 12:25 PM