Field of view and eye relief were pretty poor on the VX-3i 4.5-14x40 in my opinion. Not sure how the newer model compares.
Liked On: 19-10-2023, 10:50 PM
LOL...CLICK! I used a rifle with a set trigger to shoot my first cape buffalo. The PH almost schidt his shorts when he heard the set "click". This is an interesting thread with some excellent...
Liked On: 16-10-2023, 09:45 PM
I'm not saying at all that the example above has the cause that I'll describe but more of a generalisation - incorrect advise has floated around for ever that primers must be seated flush with the...
Liked On: 16-10-2023, 09:41 PM
That comes back to rule #5, often overlooked: Know your firing zone...... Completely agree with your sentiment.
Liked On: 21-09-2023, 01:50 PM
Personally i wouldn't shoot an animal if i didn't know exactly where my mate was. My family knew a fella who shot his nephew that way as the pig ran back between them all. He tragically ended up...
Liked On: 21-09-2023, 01:50 PM
Just follow Mickies advise - Imperial Sizing Wax No stuck cases A small tin lasts centuries. Use the lanolin on your trailer chassis.
Liked On: 10-09-2023, 10:51 AM
The little cans of John West Tuna that have been around for ever are no longer coming into NZ from Oz due to the attached plastic spoon/fork.
Liked On: 09-09-2023, 11:09 AM
I passed! Got email confirmation 12 hours after the interview, just waiting for a card in the post now.
Liked On: 01-09-2023, 11:38 PM
Personally, I would just throw my safe open and let them rummage around and take what ever info they want. Your attitude and behaviour will cause you way more grief than any poking around they...
Liked On: 01-09-2023, 11:36 PM
Get a little tiny sharp screwdriver and tap one side of the stubb to turn it out. Put a drop of penetrating oil or acetone ( nail polish remover) on it and leave it a few minutes before trying.
Liked On: 28-08-2023, 01:35 AM
Well, at least it had the decency to snap with around 1mm to spare. :D Any loctite holding it in? You might be able to get away with cutting slot in the top with a dremel for a flat head screw...
Liked On: 28-08-2023, 01:33 AM
I've also used blu tack. The plastacine users have long since departed out house.
Liked On: 22-08-2023, 11:19 PM
blip do yourself a huge favour and buy a small lot of this clear furniture polish / wax I is all you will ever need 231538 I'm a commercial joiner by trade and have epoxy glued and moulded...
Liked On: 22-08-2023, 11:17 PM
There's nothing wrong with Invercargill as its about as far away from Auckland as you can get!
Liked On: 07-08-2023, 04:09 AM
Been thinking on this a bit - when I started hunting I had no one to show me the ropes and there weren't no internet, so I spent a good couple or three years stumbling around for not a lot of result....
Liked On: 27-07-2023, 01:04 AM