10-Ring
Gone But Not Forgotten

1084 Likes

Page 24 of 73 First ... 1011121314151617181920212223242526272829303132333435363738 ... Last

• Jump to page:

1. 
   Seventenths liked post by 10-Ring On thread : Need 6.5 Creedmore load for Tikka rifle

   I have a Tikka T3x and the throat is quite long and the magazine is M+ so you can seat the bullets well out. This drops the pressure so with my particular Tikka I can load in more powder and get...

   Liked On: 04-02-2020, 10:00 PM

2. 
   dirkvanvuuren liked post by 10-Ring On thread : Need 6.5 Creedmore load for Tikka rifle

   I have a Tikka T3x and the throat is quite long and the magazine is M+ so you can seat the bullets well out. This drops the pressure so with my particular Tikka I can load in more powder and get...

   Liked On: 04-02-2020, 07:16 PM

3. 
   xtightg liked post by 10-Ring On thread : Pulling projectile - neck tension?

   I always resize after bullet pulling as the neck tension usually gets screwed up. No need to de-cap the primers.

   Liked On: 04-02-2020, 07:15 PM

4. 
   Gibo liked post by 10-Ring On thread : Pulling projectile - neck tension?

   I always resize after bullet pulling as the neck tension usually gets screwed up. No need to de-cap the primers.

   Liked On: 04-02-2020, 02:43 PM

5. 
   LBD liked post by 10-Ring On thread : Need 6.5 Creedmore load for Tikka rifle

   I have a Tikka T3x and the throat is quite long and the magazine is M+ so you can seat the bullets well out. This drops the pressure so with my particular Tikka I can load in more powder and get...

   Liked On: 03-02-2020, 11:09 PM

6. 
   GWH liked post by 10-Ring On thread : Pulling projectile - neck tension?

   I always resize after bullet pulling as the neck tension usually gets screwed up. No need to de-cap the primers.

   Liked On: 03-02-2020, 10:47 PM

7. 
   Moa Hunter liked post by 10-Ring On thread : Carbon fibre stock options for Howa Mini Action

   Can't help you with the stock but I wouldn't go with the stainless baffle as it adds weight and isn't necessary on a bolt action with it's slow rate of fire.

   Liked On: 24-01-2020, 06:38 AM

8. 
   bumblefoot liked post by 10-Ring On thread : Re-licencing.....

   No, still a 10 year licence.

   Liked On: 22-01-2020, 11:10 AM

9. 
   ChrisW liked post by 10-Ring On thread : What to buy? Light weight, 300m accuracy, cheap ammo, pref chassis stock

   Same experience here Chris. My Tikka T3x 6.5cm can seat the 143 ELD-X to the lands easily and still mag feed. One thing I've noticed is that that model in 6.5 CM now comes with a 22" barrel in NZ...

   Liked On: 21-01-2020, 09:15 AM

10. 
    6x47 liked post by 10-Ring On thread : What to buy? Light weight, 300m accuracy, cheap ammo, pref chassis stock

    Tikka T3x Superlight 6.5 Creedmoor. It'll be very accurate straight out of the box, have an excellent trigger and a super slick bolt. DPT make a nice chassis stock. I personally don't see the point...

    Liked On: 21-01-2020, 07:25 AM

11. 
    takbok liked post by 10-Ring On thread : What to buy? Light weight, 300m accuracy, cheap ammo, pref chassis stock

    Tikka T3x Superlight 6.5 Creedmoor. It'll be very accurate straight out of the box, have an excellent trigger and a super slick bolt. DPT make a nice chassis stock. I personally don't see the point...

    Liked On: 21-01-2020, 01:54 AM

12. 
    Nick-D liked post by 10-Ring On thread : Kimber 84M or Tikka T3x? Advice please

    It would be better to mount your own scope.

    Liked On: 20-01-2020, 11:25 PM

13. 
    Jit liked post by 10-Ring On thread : Sako Finlight II

    Jit, your carbon wrapped barrel would account for most of the weight difference in your comparison. Also, the aluminium Talley lightweight mounts vs the steel Optilock ringmounts make a difference...

    Liked On: 14-01-2020, 05:22 PM

14. 
    Moa Hunter liked post by 10-Ring On thread : Sako 75 halfcock

    The half bolt is definitely not anywhere near 100% safe. I remember reading about a half bolt chap who fell down a bank and ended up with the muzzle of his .308 under his chin, the bolt closed and a...

    Liked On: 14-01-2020, 12:44 PM

15. 
    rewa liked post by 10-Ring On thread : Seating tests for 147gn ELDM

    Out of interest what 6.5 cartridge are you using for your tests? You can adjust your FL die to just bump the case shoulder back .001". Wouldn't bother with neck turning unless you have a tight...

    Liked On: 13-01-2020, 03:32 PM

Page 24 of 73 First ... 1011121314151617181920212223242526272829303132333435363738 ... Last

• Jump to page: