300Shortmag
Member

102 Likes

Page 3 of 7 First 1234567 Last

• Jump to page:

1. 
   300Shortmag liked post by Larskramer On thread : Sika stag down

   Popped up and into the kawekas over the weekend, On the first arvo my mate shot his first sika at 300, just a tasty little male yearling. The next morning, we headed to another spot and as I...

   Liked On: 06-06-2023, 12:21 PM

2. 
   300Shortmag liked post by Doon On thread : 6.5prc

   ADI has load data for ar2225 which is similar to retumbo on there website.

   Liked On: 02-06-2023, 08:21 PM

3. 
   300Shortmag liked post by andyanimal31 On thread : 6.5prc

   Adi 2225 is the same powder as retumbo repackaged for hogdon. Use the same data Sent from my SM-A226B using Tapatalk

   Liked On: 02-06-2023, 08:17 PM

4. 
   300Shortmag liked post by 6.5 CRD On thread : 6.5prc

   I run 2217 in my wifes Tikka 6.5 PRC, 24" Barrel. 143gr ELDX Lapua brass & FED210m Primer. 59gr of 2217 gives me 2960fps & this is what i run it at, shoots great. Have gone up to 60.5gr which gave...

   Liked On: 02-06-2023, 08:17 PM

5. 
   300Shortmag liked post by johnd On thread : End of an era

   Back in the day we had similar welfare calls via radio from the back country out to the front on Bluff / Muzzle stations. Later in life as a linesman I even went on a tuning trip to Molesworth where...

   Liked On: 31-05-2023, 06:55 AM

6. 
   300Shortmag liked post by Mathias On thread : Magnum primers in a 260?

   Yes you should reduce your charge for magnum primers in the first instance. How much, well I'd go back at least 1.5gr and go from there to be safe. You might well end up with the same load but with a...

   Liked On: 15-05-2023, 08:42 AM

7. 
   300Shortmag liked post by 25/08 IMP On thread : Magnum primers in a 260?

   I've always used 215 primers in my .260 and a number of non magnum cal all worked real well. Sent from my CPH2145 using Tapatalk

   Liked On: 15-05-2023, 07:26 AM

8. 
   300Shortmag liked post by Philipo On thread : 6.5 question

   What rifle you running there Tim ? I take it that the PRC is your tops / open country gun, if so then ditch the suppressor, while they reduce noise they also add weight in length. For me on a LR...

   Liked On: 15-05-2023, 07:02 AM

9. 
   300Shortmag liked post by hotsoup On thread : Backlanz vs MTN Gear bipods

   Aye? This doesn't make sense. You know the mountain has pan & tilt feature eh. This has significantly more movement than the backlanz, unsure how you come to that conclusion on close range...

   Liked On: 14-05-2023, 09:22 PM

10. 
    300Shortmag liked post by Savage1 On thread : XR650R

    I've got almost no photos of me racing back in the day, but jumped on my mates 250XC a couple of weeks back with a pair of redbands on and couldn't help but hit the jumps. 223601 No crashes but...

    Liked On: 11-05-2023, 06:19 AM

11. 
    300Shortmag liked post by 7mmsaum On thread : XR650R

    50 years of motorbikes for me, and still enjoying them 223507

    Liked On: 09-05-2023, 08:16 PM

12. 
    300Shortmag liked post by XR500 On thread : XR650R

    That bike is now nudging 600 hours, with only one piston/ring change at 250 hours. No important spinny roundy things changed other than tyres/pads/wheel bearings. has to be THE cheapest most fun 2...

    Liked On: 09-05-2023, 08:16 PM

13. 
    300Shortmag liked post by 7mmsaum On thread : XR650R

    2 smokes can be quiet at low rpm, torque is king :) Sherco 290 223454

    Liked On: 09-05-2023, 08:16 PM

14. 
    300Shortmag liked post by Danny On thread : XR650R

    Got an 86 XR 100 and an 88 XR 200 in the shed. The 100 was my late Grandfathers Les’s farm bike, we did it up and gave it some love. Love them. Sent from my iPhone using Tapatalk

    Liked On: 09-05-2023, 08:16 PM

15. 
    300Shortmag liked post by XR500 On thread : XR650R

    2 strokes rule:cool: Shot more than one donk from the seat of the ol 2 smoker, just tractoring along all quiet like 223408

    Liked On: 08-05-2023, 09:42 PM

Page 3 of 7 First 1234567 Last

• Jump to page: