300Shortmag
Member

93 Likes

Page 5 of 7 First 1234567 Last

• Jump to page:

1. 
   300Shortmag liked post by johnd On thread : Black birch bivvy

   It womt be a patch on the Black Birch in Marlb. aye. Thats proper tiger country

   Liked On: 26-05-2022, 10:51 PM

2. 
   300Shortmag liked post by ghosts On thread : Black birch bivvy

   The missus and I went up there the other day for a stroll. Some fresh deer sign about. We left the area shaking our heads at the massive problem with Contorta.

   Liked On: 26-05-2022, 10:51 PM

3. 
   300Shortmag liked post by matto1234 On thread : 6.5prc

   24inch, i just checked my book and im 2940 with 60.4gr h1000. I dont think ill get to 61 without some sort of pressure sign though.

   Liked On: 26-05-2022, 10:46 PM

4. 
   300Shortmag liked post by Kelton On thread : 6.5prc

   Rl26 will be your friend Tahr I used it with the 156 in my Saum for 3080fps

   Liked On: 26-05-2022, 10:46 PM

5. 
   300Shortmag liked post by Flyblown On thread : 6.5prc

   You will probably find they will speed up a bit as your barrel breaks in properly. I’m getting those speeds out of my Creedmoor give or take with a 143 grain ELD X and a 24 inch barrel… about 700m...

   Liked On: 26-05-2022, 10:46 PM

6. 
   300Shortmag liked post by c-dog On thread : 6.5prc

   You spent some trying to get your chrony to work? , this could be the issue you are seeing. Test it at range and your velocity may not be that bad. Even if it is as stated, there is plenty of...

   Liked On: 26-05-2022, 10:45 PM

7. 
   300Shortmag liked post by matto1234 On thread : 6.5prc

   Im getting 2900 with 156s, so youve got plenty of room to improve there still :thumbsup:

   Liked On: 26-05-2022, 10:45 PM

8. 
   300Shortmag liked post by Tahr On thread : 6.5prc

   You started by asking who reloads for 6.5prc. My hand loads are close to 2900 for 140 grn and 20" barrel. 3130 with 124 grn. So it seems big gains for hand loading. Ive read of others' on here...

   Liked On: 26-05-2022, 10:45 PM

9. 
   300Shortmag liked post by stagstalker On thread : 6.5prc

   Just typical of factory ammo really. You can find comfort in knowing if you shot the same brand of ammo in a lesser calibre say a 6.5cm then it would still be slower so you still have the gain over...

   Liked On: 26-05-2022, 10:41 PM

10. 
    300Shortmag liked post by hebe On thread : Black birch bivvy

    Clover patch worth a look but the contortas pretty bad in there now. The heads of the Donald are worth dropping into as well as well as the gut below the biv. Theres random cut tracks all through...

    Liked On: 25-05-2022, 08:35 PM

11. 
    300Shortmag liked post by Cigar On thread : Black birch bivvy

    It's nearly 30 years since I was there, but there is an area called the clover patch along the ridge to the south where the track turns to drop down to Lotkow road. It was wilding pines with really...

    Liked On: 24-05-2022, 10:39 PM

12. 
    300Shortmag liked post by Ryan_Songhurst On thread : Photos of your dog

    Me old mate Knox. 20 next year and he still gets around all right. Going a bit deaf but he’s never been the best listener anyhow. F**king useless at anything other than sleeping,eating, farting, and...

    Liked On: 23-05-2022, 10:54 PM

13. 
    300Shortmag liked post by veitnamcam On thread : 6.5prc

    153atip Hornady brass 56gr RL26 215 primer COAL .30065" 2985fps from 22"

    Liked On: 19-05-2022, 10:46 PM

14. 
    300Shortmag liked post by matto1234 On thread : 6.5prc

    Hornady brass, fed primer , 60gr h1000.

    Liked On: 19-05-2022, 08:23 AM

15. 
    300Shortmag liked post by Kelton On thread : 6.5prc

    Also a waypoint I meant to add he’s had his near a year I’d say and is still loving it

    Liked On: 19-05-2022, 08:23 AM

Page 5 of 7 First 1234567 Last

• Jump to page: