308mate
Member

336 Likes

Page 14 of 23 First 1234567891011121314151617181920212223 Last

• Jump to page:

1. 
   308mate liked post by 25 /08 IMP On thread : Real world ranges for 6.5 creedmoor

   I've shot a big stag at 500 although it was with my .260 but same bullet and only 50fps faster than the Creedmoor. I've also shot others at 450 and goats at 480 with the Creedmoor. I know @Beenupto...

   Liked On: 19-06-2020, 08:54 PM

2. 
   308mate liked post by Beetroot On thread : Talley 30mm Rings Torque specs Tikka

   Effective you are gluing the rings too your rifle, it helps ensure a strong bond but is not something you have to do. I've used theses Talleys for years without epoxy or loctite. If you end up...

   Liked On: 05-06-2020, 10:46 AM

3. 
   308mate liked post by dannyb On thread : Talley 30mm Rings Torque specs Tikka

   between the base and receiver

   Liked On: 05-06-2020, 10:37 AM

4. 
   308mate liked post by dannyb On thread : Talley 30mm Rings Torque specs Tikka

   Guidelines: 6-48 receiver screws: 15-17 inch-lbs, 8-40 receiver screws 18-20 inch-lbs from the Talleys website FAQ's I checked with Gunworks last time and they were happy to advise. bed them with...

   Liked On: 05-06-2020, 10:25 AM

5. 
   308mate liked post by rossm-96 On thread : Talley 30mm Rings Torque specs Tikka

   I read somewhere 15-20 for the rings, 20-25 for the bases. Its what i have used without any problems. When tightening the ring screws with a torque wrench, i end up applying less force than i used...

   Liked On: 05-06-2020, 10:25 AM

6. 
   308mate liked post by nzspearo On thread : Finally ordered my CDS turret for the old vx6 ...

   Clicks are firm and audible, feels better than original plastic adjuster. I don’t think it would easily move by brushing past foliage etc. plus since there’s now a zero stop it’s easy to quickly...

   Liked On: 03-06-2020, 11:26 AM

7. 
   308mate liked post by Bill999 On thread : Stainless 300blk bolt gun - are they made?

   No reason at all i was very close to doing that myself Sako75/85 223,204ect would make an excellent donor too and are worth considering when you are looking to sink another $1000 into it

   Liked On: 31-05-2020, 03:52 PM

8. 
   308mate liked post by tikka On thread : Stainless 300blk bolt gun - are they made?

   Bill999 I’m the same I hunt around a lot of water, rain, drizzle, low cloud and fog, it’s too much work looking after a non stainless steel rifle. We only had 25m-30m max visibility getting this...

   Liked On: 31-05-2020, 03:46 PM

9. 
   308mate liked post by Bill999 On thread : Stainless 300blk bolt gun - are they made?

   I was in the same boat and went with a 223 Montana and rebarreled with trueflight Cost is about a grand all up to replace the barrel 141276 Needed to be stainless for the way it's used

   Liked On: 31-05-2020, 03:06 PM

10. 
    308mate liked post by tikka On thread : Stainless 300blk bolt gun - are they made?

    I thinks it was $950 fitted and threaded for a suppressor and then I had the bolt half cock safety at extra cost put on too but that was in 2015 don’t know the pricing now days. During lock I cleaned...

    Liked On: 31-05-2020, 03:06 PM

11. 
    308mate liked post by tikka On thread : Stainless 300blk bolt gun - are they made?

    Yes rebarreled not reamed. My rifle was a stock standard 1:12 223rem T3 that I picked up cheap on Trademe for $700 then sent it off to the gunsmith for a new 1:7 12” barrel with the same Tikka...

    Liked On: 30-05-2020, 10:52 PM

12. 
    308mate liked post by tikka On thread : Stainless 300blk bolt gun - are they made?

    The other option is try and find a cheap stainless 222 or 223 and rebarrel it with a Trueflie or other top quality fast twist barrel.

    Liked On: 30-05-2020, 10:27 PM

13. 
    308mate liked post by Bushwalker On thread : Stainless 300blk bolt gun - are they made?

    Got mine through H&F before they went rogue, took about 6 months to get here from usa. They don't advertise them any more.

    Liked On: 30-05-2020, 10:11 PM

14. 
    308mate liked post by tikka On thread : Stainless 300blk bolt gun - are they made?

    Kimber Adirondack are the only factory stainless steel bolt action that I know of. Gun city had some semi custom Howa, CZ and Tikka T3 in stainless made up a year or two ago with cheap suppressors.

    Liked On: 30-05-2020, 10:01 PM

15. 
    308mate liked post by Bushwalker On thread : Stainless 300blk bolt gun - are they made?

    Yes, Kimber Adirondack in 300blk, i have one and it's a nice little rifle

    Liked On: 30-05-2020, 09:45 PM

Page 14 of 23 First 1234567891011121314151617181920212223 Last

• Jump to page: