40mm
Member

3357 Likes

Page 16 of 224 First ... 2345678910111213141516171819202122232425262728293066116 ... Last

• Jump to page:

1. 
   40mm liked post by Maca49 On thread : DIY Fibre wads?

   I used cork tile wads and made a punch for them, works fine

   Liked On: 25-10-2023, 08:45 PM

2. 
   40mm liked post by quentin On thread : Rules around shooting on a lifestyle block

   The segmented subs ricochet more than a solid 22lr round from my experience. Bullet breaks into 3 petals, and each has the ability to ricochet. The difference is the lack of mass or aerodynamics of...

   Liked On: 25-10-2023, 05:57 PM

3. 
   40mm liked post by Beavis On thread : NZ post ... not moving anything to do with firearms

   They would do it just fine until after ChCh before everyone wanted to be seen to be doing something. Would be prudent to start bugging certain people to put pressure on them to get their act together...

   Liked On: 24-10-2023, 10:37 PM

4. 
   40mm liked post by Rushy On thread : Found rifle - Story time

   I wonder whether finding that is a trigger event. Ha ha ha ha

   Liked On: 24-10-2023, 01:09 PM

5. 
   40mm liked post by 300wsm for life On thread : Found rifle - Story time

   I put that in the hut. Found it on a shingle fan.

   Liked On: 23-10-2023, 09:20 PM

6. 
   40mm liked post by Micky Duck On thread : Found rifle - Story time

   should buff out OK..... if scope is leupold send it back for a service LOL.

   Liked On: 23-10-2023, 09:19 PM

7. 
   40mm liked post by 6.5 CRD On thread : Found rifle - Story time

   Run into this at morgan hut - durville valley, lake rotoroa. Assuming it was found somewhere in the durville valley & left at the hut. Surely someone on here knows the owner & story behind it...

   Liked On: 23-10-2023, 09:19 PM

8. 
   40mm liked post by Jhon On thread : Ted Rogers Auction

   At the end the old 22s, 303s etc were being sold for $20-40 each, $50ish for 3 (Toz) single shots, $30 for a Parker Hale 303 - the mag was worth twice that. My wife asked when I left if I was...

   Liked On: 18-10-2023, 09:58 PM

9. 
   40mm liked post by Wingman On thread : Another .45acp Delisle Comando Carbine completed.

   235537 235538 235539 235540

   Liked On: 18-10-2023, 08:35 AM

10. 
    40mm liked post by Micky Duck On thread : "Record Breaking Hunter" Youtube

    that chammy was puffing like heck...and if the fellas were as said when clip started 200 yards away before it spotted them..stinks like hazing to me.... but yes...your land,his $$$$$ whatever...

    Liked On: 17-10-2023, 07:28 AM

11. 
    40mm liked post by Maca49 On thread : Young Toby Goodley

    It’s been 8 years today, since this young guy passed on, RIP Toby.

    Liked On: 16-10-2023, 08:16 PM

12. 
    40mm liked post by zimmer On thread : F**ck'n CCI Primers !

    +1 above. NRANZ in their rules stipulate at least 30 seconds, and then open bolt with face well clear and none of your mates close behind.

    Liked On: 16-10-2023, 08:14 PM

13. 
    40mm liked post by zimmer On thread : Home made reloading tools

    Loading Blocks. The bottom one is the first thing I made when starting out. These ones don't melt when you spray them with lube! 235012 Home made Concentricity Gauge on the left. Does a slightly...

    Liked On: 16-10-2023, 08:13 AM

14. 
    40mm liked post by Puffin On thread : Home made reloading tools

    Great thread topic. I have something similar assembled using a 5.5mm drill for a Large Rifle primer pocket gauge. When sanded down to the right amount of taper it won't seat when the primer pocket...

    Liked On: 16-10-2023, 08:12 AM

15. 
    40mm liked post by terryf On thread : Carrying Knives

    There seems to be a bit of confusion here between import policy and legislation on knife ownership. No knife is prohibited from being owned in NZ - you may own daggers, swords, butterfly knives,...

    Liked On: 15-10-2023, 12:03 PM

Page 16 of 224 First ... 2345678910111213141516171819202122232425262728293066116 ... Last

• Jump to page: