6.5 CRD
Member

514 Likes

Page 23 of 35 First ... 91011121314151617181920212223242526272829303132333435 Last

• Jump to page:

1. 
   300CALMAN liked post by 6.5 CRD On thread : New ultra lite bush build - your thoughts?

   Ive owned a few creedmoors now in various lengths so speaking from experience, if you cut them short it does hurt the velocity alot more than some other cals like .308, so if your wanting to shoot to...

   Liked On: 28-05-2023, 02:03 PM

2. 
   Gkp liked post by 6.5 CRD On thread : New ultra lite bush build - your thoughts?

   Ive owned a few creedmoors now in various lengths so speaking from experience, if you cut them short it does hurt the velocity alot more than some other cals like .308, so if your wanting to shoot to...

   Liked On: 27-05-2023, 09:10 AM

3. 
   WaikatoBushman liked post by 6.5 CRD On thread : Discussion around 7mm Magnums

   Really just comes down to what you intended use is. An off the shelf 7 Rem Mag is going to limit you as far as twist rate & COAL. Most off the shelf rifles will have a 1/10 - 1/11 twist so you could...

   Liked On: 05-05-2023, 08:28 AM

4. 
   makka liked post by 6.5 CRD On thread : Legal length.

   M15x1 & 5/8x24 are my main rifles

   Liked On: 28-04-2023, 09:14 AM

5. 
   makka liked post by 6.5 CRD On thread : Legal length.

   makka slightly off topic with this thread but would making a cap like you have shown above but with a blank end on it be something you could make and sell? Ive wanted something like this for a while,...

   Liked On: 28-04-2023, 12:35 AM

6. 
   ROKTOY liked post by 6.5 CRD On thread : Legal length.

   makka slightly off topic with this thread but would making a cap like you have shown above but with a blank end on it be something you could make and sell? Ive wanted something like this for a while,...

   Liked On: 27-04-2023, 10:30 PM

7. 
   Micky Duck liked post by 6.5 CRD On thread : Legal length.

   Have thought of that but most caps are too large for the threaded end of the muzzle. I never shoot this rifle without putting the supressor on so "it" wouldnt be an issue, but i do see where your...

   Liked On: 27-04-2023, 08:08 PM

8. 
   Moa Hunter liked post by 6.5 CRD On thread : Craft me a bush hunting rifle

   I run a tikka .308 shortend to 16 inches with a hardy compact supressor on it, shooting 130gr barnes ttsx @ just under 3k. I find it brilliant, its nice and handy in the bush, light to carry. Ive...

   Liked On: 27-04-2023, 10:23 AM

9. 
   Roarless20 liked post by 6.5 CRD On thread : 6.5 Creedmoor, 143gr ELDX & Superformance

   Well i have come to the conclusion this brass must be alot tougher than the last batch of lapua brass i used. Primers werent overly flat either so the combination of that & the brass appearing fine...

   Liked On: 25-04-2023, 12:05 PM

10. 
    Steelisreal liked post by 6.5 CRD On thread : 6.5 Creedmoor, 143gr ELDX & Superformance

    Well i have come to the conclusion this brass must be alot tougher than the last batch of lapua brass i used. Primers werent overly flat either so the combination of that & the brass appearing fine...

    Liked On: 25-04-2023, 11:06 AM

11. 
    Pommy liked post by 6.5 CRD On thread : 6.5 Creedmoor, 143gr ELDX & Superformance

    Well i have come to the conclusion this brass must be alot tougher than the last batch of lapua brass i used. Primers werent overly flat either so the combination of that & the brass appearing fine...

    Liked On: 25-04-2023, 11:02 AM

12. 
    Moa Hunter liked post by 6.5 CRD On thread : 6.5 Creedmoor, 143gr ELDX & Superformance

    Well i have come to the conclusion this brass must be alot tougher than the last batch of lapua brass i used. Primers werent overly flat either so the combination of that & the brass appearing fine...

    Liked On: 25-04-2023, 10:23 AM

13. 
    Moa Hunter liked post by 6.5 CRD On thread : 6.5 Creedmoor, 143gr ELDX & Superformance

    Cool. im hoping 25/08 IMP may chip in with his thoughts. For some context - hornady book max is 44.7gr ~ 2800fps in a 24" bbl & hodgdon is 45.8gr for 2800fps. My rifle is a 24" 1/8 Tikka & i ran a...

    Liked On: 25-04-2023, 10:19 AM

14. 
    Swanny liked post by 6.5 CRD On thread : 6.5 Creedmoor, 143gr ELDX & Superformance

    Anyone experimented with this combination? Ran a powder charge ladder for shits & giggles this sunday just gone & got some rather surprising results that i did not expect. Makes me wonder why i...

    Liked On: 24-04-2023, 07:00 PM

15. 
    Gkp liked post by 6.5 CRD On thread : 6.5 Creedmoor, 143gr ELDX & Superformance

    Yeah, i have no intention of actually running this load as ill be running 97gr hammers with this rifle. Just loaded some up out of interest to see how they did compared to my old 18" creedmoor and...

    Liked On: 24-04-2023, 04:07 PM

Page 23 of 35 First ... 91011121314151617181920212223242526272829303132333435 Last

• Jump to page: