6.5 CRD
Member

473 Likes

Page 1 of 32 123456789101112131415 ... Last

• Jump to page:

1. 
   Bowhunta liked post by 6.5 CRD On thread : 7PRC load data

   My barrel is 22", barely shot factory through it i started reloading straight away but from memory the factory 175 eldx i did shoot was around 2940. I havent got 2225 shooting good groups yet but...

   Liked On: 06-05-2024, 01:48 PM

2. 
   Bowhunta liked post by 6.5 CRD On thread : 7PRC load data

   I have tried 2217 2225 and RL26 in my 7prc behind 175gr ELDX, hornady brass and FED215 primer. few things i can note - RL26 gives the best speed, not by a huge amount though, 2225 wasnt far...

   Liked On: 06-05-2024, 01:46 PM

3. 
   AMac liked post by 6.5 CRD On thread : How consistent is clean bore shot?

   All of my rifles shoot different POI when they are freshly cleaned and not fouled, some worse than others. Once i have a load sorted for one of my given hunting rifles, i dont clean the bore at...

   Liked On: 30-04-2024, 10:46 PM

4. 
   witchcraft liked post by 6.5 CRD On thread : How consistent is clean bore shot?

   All of my rifles shoot different POI when they are freshly cleaned and not fouled, some worse than others. Once i have a load sorted for one of my given hunting rifles, i dont clean the bore at...

   Liked On: 30-04-2024, 05:43 PM

5. 
   superdiver liked post by 6.5 CRD On thread : 7mm08 162 gr Eld-M Updates 2024

   My Sako A7 7-08 is a 14.5 Inch 9.5 twist barrel and it stabilises the 162 ELDM just fine at around 2500fps. Stacks them into sub moa groups & i have used it out to around 400y on deer.

   Liked On: 28-04-2024, 10:35 PM

6. 
   Hunter_Nick liked post by 6.5 CRD On thread : Keen to try a big 7mm

   Being its important to be able to spot your own shots, IMO a 162 ELDM at a slower MV will probably be ideal. Its an awesome killer & most importantly is still very effective at very low speeds. If...

   Liked On: 26-04-2024, 09:16 PM

7. 
   Steelisreal liked post by 6.5 CRD On thread : Keen to try a big 7mm

   Being its important to be able to spot your own shots, IMO a 162 ELDM at a slower MV will probably be ideal. Its an awesome killer & most importantly is still very effective at very low speeds. If...

   Liked On: 26-04-2024, 12:15 PM

8. 
   caberslash liked post by 6.5 CRD On thread : 7mm08 162 gr Eld-M Updates 2024

   Superformance is my go to for 7mm08 with the 162 eldm, i run them at 2.180 BTO measurement. Can get some pretty impressive performance speed wise from the small 08 case & i found accuracy over a...

   Liked On: 26-04-2024, 05:39 AM

9. 
   will.i.em liked post by 6.5 CRD On thread : 7mm08 162 gr Eld-M Updates 2024

   My Sako A7 7-08 is a 14.5 Inch 9.5 twist barrel and it stabilises the 162 ELDM just fine at around 2500fps. Stacks them into sub moa groups & i have used it out to around 400y on deer.

   Liked On: 24-04-2024, 10:46 AM

10. 
    Kelton liked post by 6.5 CRD On thread : 7mm08 162 gr Eld-M Updates 2024

    My Sako A7 7-08 is a 14.5 Inch 9.5 twist barrel and it stabilises the 162 ELDM just fine at around 2500fps. Stacks them into sub moa groups & i have used it out to around 400y on deer.

    Liked On: 24-04-2024, 09:45 AM

11. 
    Gkp liked post by 6.5 CRD On thread : 7mm08 162 gr Eld-M Updates 2024

    Superformance is my go to for 7mm08 with the 162 eldm, i run them at 2.180 BTO measurement. Can get some pretty impressive performance speed wise from the small 08 case & i found accuracy over a...

    Liked On: 23-04-2024, 07:43 AM

12. 
    Rock river arms hunter liked post by 6.5 CRD On thread : 7mm rem mag projectile options

    I have found the 162gr ELDM accurate and a great killer, shooting it at slower 7mm08 speeds. Not sure how good it would be up close at rem mag speeds but if most of your shooting is further out, you...

    Liked On: 03-04-2024, 09:30 PM

13. 
    7mmsaum liked post by 6.5 CRD On thread : 7mm rem mag projectile options

    I have found the 162gr ELDM accurate and a great killer, shooting it at slower 7mm08 speeds. Not sure how good it would be up close at rem mag speeds but if most of your shooting is further out, you...

    Liked On: 31-03-2024, 07:08 AM

14. 
    Mistral liked post by 6.5 CRD On thread : 6.5CM bullet performance

    Same here, ive lost count of how many deer i have shot with the 143 ELDX, its a great killer up close and out far. Found them really easy to get them to shoot in all the rifles i have used them in...

    Liked On: 18-03-2024, 12:47 PM

15. 
    30.06king liked post by 6.5 CRD On thread : Comparison of Primers: Federal 210 vs White River Energetics LR

    I have also done a comparison test with WRE vs FED210m. 6.5 Creedmoor & 7mm-08. Loaded up some of my go to loads in both rifles that i usually use FED210m in and found no measurable difference in...

    Liked On: 09-03-2024, 10:07 AM

Page 1 of 32 123456789101112131415 ... Last

• Jump to page: