6.5 CRD
Member

335 Likes

Page 11 of 23 First 1234567891011121314151617181920212223 Last

• Jump to page:

1. 
   6.5 CRD liked post by 300wsm for life On thread : 300wsm advice

   As with any projectile shot placement is key. You will find you can make 1 bullet work at a multitude of different distances. As long as you understand what it's designed for and perceived...

   Liked On: 18-06-2023, 09:31 AM

2. 
   6.5 CRD liked post by gadgetman On thread : The 16" 270

   Great pig gun. Drop it and singe it in one operation.

   Liked On: 16-06-2023, 03:19 AM

3. 
   6.5 CRD liked post by Roarless20 On thread : Lapua 6.5 PRC Brass - Split Necks

   I'm just having the same issue with Norma brass in my 260rem. All cases which have been amp annealed. Splits on 1 in 4 cases on first, 2nd and 3rd firings. I've checked neck diameters on new, loaded...

   Liked On: 15-06-2023, 04:23 AM

4. 
   6.5 CRD liked post by Cyclops On thread : Lapua 6.5 PRC Brass - Split Necks

   Are all the splits the same shape/type? The photograph you posted looks like the split is inwards not outwards as if the expanding case has been forced onto something. I'd be surprised if it...

   Liked On: 14-06-2023, 08:57 PM

5. 
   6.5 CRD liked post by andyanimal31 On thread : Lapua 6.5 PRC Brass - Split Necks

   I reckon talk to Alex at amp annealing. He is very approachable and I would imagine there's not much he doesn't know about that sort of thing. Ultra sonic cleaning is an interesting thought Sent...

   Liked On: 14-06-2023, 08:57 PM

6. 
   6.5 CRD liked post by gqhoon On thread : Lapua 6.5 PRC Brass - Split Necks

   You generally get 0.5 thousandths of spring back when firing. So your chamber will be 0.2975 - 0.298 at the most.

   Liked On: 14-06-2023, 08:57 PM

7. 
   6.5 CRD liked post by akaroa1 On thread : Lapua 6.5 PRC Brass - Split Necks

   That is an unusual split, not going through to the case mouth. Because you are so through with the brass prep and the Lapua brass should be just fine. I think there is something wrong between the...

   Liked On: 14-06-2023, 09:05 AM

8. 
   6.5 CRD liked post by stagstalker On thread : Sling vs Shooting Sticks Hunting

   Sitting and supporting left upper arm on left inner thigh and right upper arm on right inner thigh (right handed). I personally hate carrying my hunting rifle around with a sling on it and I have...

   Liked On: 13-06-2023, 08:36 PM

9. 
   6.5 CRD liked post by jackson21 On thread : Bullet seating depths

   Pretty much follow this start off at 20 thou or mag length for powder test/pressure. Sometimes try out to 120 thou, also depending on how projectile sits in case, I.e not sitting right out or...

   Liked On: 13-06-2023, 08:36 PM

10. 
    6.5 CRD liked post by gimp On thread : 6.5 Creedmoor? whats everyones thoughts? on hunting performance

    Be silly to buy anything other than a 6.5CM in a factory rifle for general purpose hunting these days 140-147gr 6.5mm bullets of the right construction at 2600-2700 fps kill things extremely well...

    Liked On: 13-06-2023, 05:28 AM

11. 
    6.5 CRD liked post by stagstalker On thread : How to calculate shooting angle?

    Yes just a unhelpful "back in my day". Sorry I'm going to bite again.. (keyboard warrior doh). Your stand point is moot, when you were the young generation the exact same would have been said by the...

    Liked On: 13-06-2023, 05:05 AM

12. 
    6.5 CRD liked post by stagstalker On thread : How to calculate shooting angle?

    I guess you still just write letters instead of emails because it just works too?

    Liked On: 12-06-2023, 08:14 AM

13. 
    6.5 CRD liked post by Nick-D On thread : 6.5 Creedmoor? whats everyones thoughts? on hunting performance

    Err you would have an 18 inch 260 but wouldn't go shorter than 20 in a creed? You reckon the less than 2% capacity difference will have any meaningful effect on performance in a short barrel?...

    Liked On: 12-06-2023, 05:09 AM

14. 
    6.5 CRD liked post by Roarless20 On thread : 2208 vs 2206h for .308

    Try some different seating depths with the 2206h. You will find your group sizes change. Then you might have the velocity and the accuracy.

    Liked On: 12-06-2023, 04:19 AM

15. 
    6.5 CRD liked post by gqhoon On thread : Using comparator tool when seating projectiles.

    You’re right, my maths sucks. But the point remains, +/- 1mm difference in seating depth makes a massive difference.

    Liked On: 11-06-2023, 04:54 AM

Page 11 of 23 First 1234567891011121314151617181920212223 Last

• Jump to page: