6.5 CRD
Member

473 Likes

Page 15 of 32 First 1234567891011121314151617181920212223242526272829 ... Last

• Jump to page:

1. 
   NathanSBR liked post by 6.5 CRD On thread : Some thoughts on 6.5 PRC

   Interesting read. Some of the mentioned loads that have "no signs of pressure" show to be well over pressure when run through GRT. To be fair though GRT isnt always 100% accurate, usually a good...

   Liked On: 22-06-2023, 10:27 AM

2. 
   Moa Hunter liked post by 6.5 CRD On thread : Some thoughts on 6.5 PRC

   Understood. Its not so much that i dont understand why it isnt a great deal faster, I for the most part understand the mechanics of it & why its diminishing returns. My gripe was more with hornadys...

   Liked On: 22-06-2023, 07:11 AM

3. 
   Moa Hunter liked post by 6.5 CRD On thread : Some thoughts on 6.5 PRC

   GRT shows this aswell, with the slower burning powders velocity is still on a reasonably steep incline by 24-26 inches, shortening a 6.5 PRC hurts the velocity alot more than alot of other cartridges

   Liked On: 22-06-2023, 07:10 AM

4. 
   Hunter_Nick liked post by 6.5 CRD On thread : Lapua 6.5 PRC Brass - Split Necks

   Ive come to the conclusion its faulty brass. Mainly because my processes are the same with not just this brass but all the brass for all my rifles, and ive never had this before. Not to mention, most...

   Liked On: 21-06-2023, 10:22 PM

5. 
   Doon liked post by 6.5 CRD On thread : Could any quickload experts run a simulation for me?

   Yeah i just fiddled around with it in GRT too, Looks like mid 2600 would even be a push with 2206h/cfe223 etc. Be far better off staying .223

   Liked On: 21-06-2023, 06:24 PM

6. 
   Roarless20 liked post by 6.5 CRD On thread : Lapua 6.5 PRC Brass - Split Necks

   Ive come to the conclusion its faulty brass. Mainly because my processes are the same with not just this brass but all the brass for all my rifles, and ive never had this before. Not to mention, most...

   Liked On: 21-06-2023, 04:35 PM

7. 
   dannyb liked post by 6.5 CRD On thread : Lapua 6.5 PRC Brass - Split Necks

   Ive come to the conclusion its faulty brass. Mainly because my processes are the same with not just this brass but all the brass for all my rifles, and ive never had this before. Not to mention, most...

   Liked On: 21-06-2023, 03:13 PM

8. 
   Moa Hunter liked post by 6.5 CRD On thread : Some thoughts on 6.5 PRC

   Their test barrel is 26". My own 26" didnt even really come close to hornady claims & neither does my 24" even if your generous as far as what you would expect to lose with a 2" shorter barrel.

   Liked On: 21-06-2023, 08:25 AM

9. 
   Kelton liked post by 6.5 CRD On thread : Some thoughts on 6.5 PRC

   Their test barrel is 26". My own 26" didnt even really come close to hornady claims & neither does my 24" even if your generous as far as what you would expect to lose with a 2" shorter barrel.

   Liked On: 21-06-2023, 08:11 AM

10. 
    25/08 IMP liked post by 6.5 CRD On thread : Some thoughts on 6.5 PRC

    Understood. Its not so much that i dont understand why it isnt a great deal faster, I for the most part understand the mechanics of it & why its diminishing returns. My gripe was more with hornadys...

    Liked On: 21-06-2023, 07:10 AM

11. 
    Danny liked post by 6.5 CRD On thread : Some thoughts on 6.5 PRC

    GRT shows this aswell, with the slower burning powders velocity is still on a reasonably steep incline by 24-26 inches, shortening a 6.5 PRC hurts the velocity alot more than alot of other cartridges

    Liked On: 20-06-2023, 10:24 PM

12. 
    Mathias liked post by 6.5 CRD On thread : Some thoughts on 6.5 PRC

    GRT shows this aswell, with the slower burning powders velocity is still on a reasonably steep incline by 24-26 inches, shortening a 6.5 PRC hurts the velocity alot more than alot of other cartridges

    Liked On: 19-06-2023, 08:29 AM

13. 
    Seventenths liked post by 6.5 CRD On thread : Some thoughts on 6.5 PRC

    Browning & Tikka in 6.5 PRC. Tikka with the creedmoor. Tikka 6.5 PRC 24" does 3050 with the 143 eldx leaning on it pretty hard with RL26. Tikka 6.5 Creedmoor 24" does 2960 with 143 eldx also...

    Liked On: 18-06-2023, 10:51 PM

14. 
    Kelton liked post by 6.5 CRD On thread : Tikka 7 PRC

    Only the h2, havent tried anything else shoots great. Sent from my iPhone using Tapatalk

    Liked On: 18-06-2023, 06:34 PM

15. 
    tibo liked post by 6.5 CRD On thread : Tikka 7 PRC

    Only the h2, havent tried anything else shoots great. Sent from my iPhone using Tapatalk

    Liked On: 18-06-2023, 06:03 PM

Page 15 of 32 First 1234567891011121314151617181920212223242526272829 ... Last

• Jump to page: