https://nzsafetyblackwoods.co.nz/en/ninja-celsius-ice-full-coat-gloves-m-3xl-pair-405174
Liked On: 13-05-2024, 09:16 AM
As someone who really feels the cold, gloves are a bonus, but I find that keeping my core warm is just as important.
Liked On: 13-05-2024, 09:15 AM
With the IBC's I cut the lid off the top of the plastic bladder tank and when the wood is stored inside it stops the dust and bark crud going everywhere. The 'lid' or top of the bladder (I cut them...
Liked On: 10-05-2024, 09:52 PM
Good problems are good I solved that problem when wood shed was full and I didn't want to build more fixed sheds I made 10 of these transportable wood sheds They hold a full cord Built off the...
Liked On: 10-05-2024, 09:50 PM
Before reading please note we are relatively new hunters nearly in our 40’s, we are learning by getting out there and beating our feet. Basically most of what we know comes from other peoples Youtube...
Liked On: 09-05-2024, 10:06 AM
We also dry hired one of these for $70 an hour. 110 cube split in one day. https://youtu.be/dyBQxv9mjMc?si=xdDFzf-hS_jvR2Kq Do the maths on that if there is a group of families doing wood...
Liked On: 08-05-2024, 10:37 PM
We just park the 1000L pod baskets next to the splitter and fill them. each hold a cube, and last two weeks in winter. They stay out in the paddock for 6 months in the sun and wind, then we round...
Liked On: 08-05-2024, 08:57 PM
Ive built a few splitters. And converted a horizontal one to a vertical with a table etc. You certainly can get carried away if you want all the gizmo's. ( like lifters, conveyer, etc) The...
Liked On: 08-05-2024, 09:33 AM
More hp Larger ram capacity 2 speed pump Vertical Ring lifter
Liked On: 05-05-2024, 09:13 PM
I hire a Brent Smith log splitter with a ring lifter the last couple times, would'nt use one with out the log lifter now. good machine, its set up for health and safety got to have both hands on...
Liked On: 05-05-2024, 09:13 PM
I've got a keyboard so pretty much everything about anything. Back to work stick burner
Liked On: 02-05-2024, 08:59 AM
Thankfully they have finally changed it with the 90 https://uploads.tapatalk-cdn.com/20240428/9cfe9fd121485cfe09b1988844acffd3.jpg Sent from my SM-S916B using Tapatalk
Liked On: 29-04-2024, 08:13 AM
The primer on the left and centre have a different appearance from each other. Are they the same primers and the same load? At first glance without any other info, this might indicate some kind of...
Liked On: 28-04-2024, 09:06 AM
Had a great week with the boy chasing sika in our Clements road spot, he shot is first one in there last roar and was keen to go one better. He definitely did that!! It was a awesome hunt and stocked...
Liked On: 28-04-2024, 09:03 AM
Have used plenty of FC brass over the years & in a heap of different calibres and had good results. Only time I’ve seen something similar was “once fired old brass” (243), probably stored 7-8years or...
Liked On: 27-04-2024, 08:48 AM