That last poster sounds like very low-grade AI ..
Liked On: 03-06-2023, 08:45 PM
the best laid plans...
Liked On: 01-06-2023, 10:22 PM
Demonstrated that on the weekend. A 5 thou shift changed a "good" load in my target rifle into a hammer. 51 of the 60 shots were Xs ( ~1/2min) at 300m. It was only that the group opened up a bit with...
Liked On: 01-06-2023, 09:26 AM
Higher powered scope are always less forgiving on eye relief, setup and brightness. If you think 18X is challenging, try a 60X target scope and the 18 will suddenly seem fine.
Liked On: 31-05-2023, 04:05 PM
I saw this advice at the bottom of the page: "Handy Hints! Cleaning a meat band saw is not an easy job, especially when you cannot let water near any of the electrical components! At one of the...
Liked On: 31-05-2023, 11:48 AM
Higher powered scope are always less forgiving on eye relief, setup and brightness. If you think 18X is challenging, try a 60X target scope and the 18 will suddenly seem fine.
Liked On: 31-05-2023, 08:55 AM
Exactly what my team mate found. Some rounds wouldn't chamber and the cases were losing length after SS tumbling. It was from severe peening of the case mouths.
Liked On: 29-05-2023, 12:40 PM
Sooo, if DED was ripping us off, what are Hardy doing?
Liked On: 24-05-2023, 10:29 PM
When DED had the agency stolen from him, the prices headed North rapidly..
Liked On: 24-05-2023, 10:23 PM
Sooo, if DED was ripping us off, what are Hardy doing?
Liked On: 24-05-2023, 02:35 AM
Sooo, if DED was ripping us off, what are Hardy doing?
Liked On: 23-05-2023, 08:22 PM
When DED had the agency stolen from him, the prices headed North rapidly..
Liked On: 23-05-2023, 10:09 AM
The gear in total is strictly for TR ("target rifle", ie .308W shot prone with iron sights and sling on an NRA range). Yep, that loading gear is well-used.. That's not to say it's beyond useful,...
Liked On: 21-05-2023, 08:37 PM
Properly designed and executed custom in-the-ear electronic plugs are the way to go BUT they're very expensive. I have three sets which are converted high-end hearing aids but these aren't an option...
Liked On: 16-05-2023, 01:22 AM
The closest you'll prob come with that is muffs that have separate mics/amps/vol control on each side. Doubt many are made these days. Actually, that's the reason many electronic muffs fail- the wire...
Liked On: 15-05-2023, 08:21 PM