6x47
Member

1372 Likes

Page 88 of 92 First ... 3874757677787980818283848586878889909192 Last

• Jump to page:

1. 
   Beaker liked post by 6x47 On thread : Try NRA Shooting Canterbury

   Not quite. Besides the 8mm calibre limit, there is a 5000 Joule (3680 ft-lb) energy limit on any NRA range. So your 7RUM would be out. It's also desirable that you have a known 300yd zero. Many...

   Liked On: 21-09-2015, 10:26 AM

2. 
   von tempsky fan liked post by 6x47 On thread : What's a nice 22

   That Anschutz will certainly shoot (simply because it's an Anschutz) but those ugly rotating safeties do them no justice. My rimfire safe queen, though it does get shot a bit at times. A Model 1...

   Liked On: 21-09-2015, 08:51 AM

3. 
   R93 liked post by 6x47 On thread : Sighting in. Back to basics

   No, the POI should not change at all over the power range unless you have a cruddy scope. Only the precision of aim should change. I've heard it said high power causes wobble but you're only...

   Liked On: 14-09-2015, 08:30 PM

4. 
   Bagheera liked post by 6x47 On thread : HOW IMPORTANT IS ES

   Yes, all very interesting but overly complicated. A fair summary might be: SD- How consistent are my velocities on average? ES- What are the worst case velocity variations? (PS. I used to...

   Liked On: 04-09-2015, 02:32 PM

5. 
   steven liked post by 6x47 On thread : HOW IMPORTANT IS ES

   The value of ES is knowing the worst case scenario, so this applies particularly to long range target shooting. A load with a reasonable SD will put most into tight elevation at long range BUT if the...

   Liked On: 01-09-2015, 10:43 AM

6. 
   Rat Fang liked post by 6x47 On thread : Fiordland charters

   If the operator is Tom Fishburn, my brother (an ex local..) would happily recommend him. A good guy he says

   Liked On: 25-08-2015, 11:06 PM

7. 
   southernredneck liked post by 6x47 On thread : Fiordland charters

   If the operator is Tom Fishburn, my brother (an ex local..) would happily recommend him. A good guy he says

   Liked On: 25-08-2015, 09:09 PM

8. 
   Skatieguy liked post by 6x47 On thread : How not to kill a cow

   Know what you mean Brads- we once had the "fortune" to get some of them despite telling the stock agent we wanted quiet cattle. One bitch jumped off the truck and straight through four fences. Took...

   Liked On: 25-08-2015, 02:55 PM

9. 
   BRADS liked post by 6x47 On thread : How not to kill a cow

   Know what you mean Brads- we once had the "fortune" to get some of them despite telling the stock agent we wanted quiet cattle. One bitch jumped off the truck and straight through four fences. Took...

   Liked On: 25-08-2015, 09:51 AM

10. 
    Munsey liked post by 6x47 On thread : diesel Engine chips

    DPS offer this. Had it done to my Ranger and I'd -never- go back to the std map. Uses slightly less gas but the extra torque is astounding.

    Liked On: 06-08-2015, 06:50 PM

11. 
    gadgetman liked post by 6x47 On thread : diesel Engine chips

    DPS offer this. Had it done to my Ranger and I'd -never- go back to the std map. Uses slightly less gas but the extra torque is astounding.

    Liked On: 06-08-2015, 02:57 PM

12. 
    JoshC liked post by 6x47 On thread : diesel Engine chips

    DPS offer this. Had it done to my Ranger and I'd -never- go back to the std map. Uses slightly less gas but the extra torque is astounding.

    Liked On: 06-08-2015, 09:35 AM

13. 
    Savage1 liked post by 6x47 On thread : Has anyone on this forum machined some cant into two piece rings?

    I can't see how you can significantly "cant" normal rings by simply shimming one end. You will end up with misaligned rings that will chew into the scope tube. If you lap them with a round bar, the...

    Liked On: 26-07-2015, 10:49 AM

14. 
    steven liked post by 6x47 On thread : F-Class

    Absolutely nothing wrong with the HBCs Kurt. Can't blame the projectile if you miss :P

    Liked On: 26-06-2015, 08:40 AM

15. 
    steven liked post by 6x47 On thread : Cheap powder ADI

    The bigger issue for much hobby stuff in NZ is the price gouging the official importers do. My local shop often apologizes for not being able to offer a competitive price relative to imported stuff...

    Liked On: 09-06-2015, 04:08 PM

Page 88 of 92 First ... 3874757677787980818283848586878889909192 Last

• Jump to page: