aimless
Member

24 Likes

Page 1 of 2 12 Last

• Jump to page:

1. 
   aimless liked post by dannyb On thread : 6.5 PRC Load Development Begins

   Never needed them yet.....no doubt they work but have developed plenty of 1/2 MOA or better loads without them.

   Liked On: 17-05-2025, 11:18 PM

2. 
   aimless liked post by tetawa On thread : Buying second hand - Gun City

   All I would state is that most asking prices are well above what todays market is fetching..

   Liked On: 17-05-2025, 12:15 PM

3. 
   aimless liked post by JohnDuxbury On thread : Sako 30-06. What's it worth?

   Way way too low. If you got that rifle for anything under two thousand you stole it, and the stutzen carry an additional premium. Put it this way, I could sell it for $2500 and not have too much...

   Liked On: 07-04-2025, 01:42 PM

4. 
   aimless liked post by flock On thread : Lee Collet Die Decapping Pin Removed

   I grund the decapping off, reason being so I can pull projectiles, pour the powder out, resize the neck, pour the powder back in and seat a different projectile. concentricity is good, 1 thou...

   Liked On: 03-01-2025, 08:56 PM

5. 
   aimless liked post by erniec On thread : 30 30 reloads

   getting back to basics 35 ta 40 grains av blayk powduurr in thay ...err. 30/30 unduurr the 110 grayn be awful*fine

   Liked On: 31-07-2024, 11:56 AM

6. 
   aimless liked post by Tasbay On thread : Black Powder hunt

   Have had some PM`s asking me how I make Black Powder. I have been making it for 30 odd years due mainly to the lack of it in the South Island and after reading about making it in a book Foxfire...

   Liked On: 16-07-2024, 09:33 PM

7. 
   aimless liked post by Tasbay On thread : Black Powder hunt

   251285 251286 Son and I went on a Goat cull over the weekend. Once we were over that I pulled out the Lyman Great Plains Rifle and managed to bag 2 Pigs and a Six pointer red. Was using homemade...

   Liked On: 16-07-2024, 09:29 PM

8. 
   aimless liked post by mick On thread : Powder options for 7mm08

   Tikka 18 inch barrel Staball 6.5 51gs 139 sst @ 2865 Ar 2208 43gs 139 sst @ 2895 Both sub moa

   Liked On: 16-07-2024, 08:34 PM

9. 
   aimless liked post by grandpamac On thread : 250 Savage Ackley Improved

   Greetings, Layne Simpson did an article on the 250 Savage Improved in the October 2018 Handloader. His version had a 30 degree shoulder but results would be close to the AI. I found the article on...

   Liked On: 12-05-2024, 08:17 PM

10. 
    aimless liked post by Tech On thread : 250 Savage Ackley Improved

    After purchasing a Cooper Custom Classic in 250 Sav AI for my wife I reached out to Sierra Bullets for info on fire forming, Sierra use the 250 Sav AI for their daily quality control tests on their...

    Liked On: 12-05-2024, 08:17 PM

11. 
    aimless liked post by Basenjiboy On thread : 250 Savage Ackley Improved

    The case capacity of a 250AI and a 25-08 (a.k.a. 25 Souper) are very close. I used 250AI data to develop starting loads for the 25-08, although as you point out there is not much current data in the...

    Liked On: 12-05-2024, 08:16 PM

12. 
    aimless liked post by grandpamac On thread : 250 Savage Ackley Improved

    Greetings aimless, Nice handle by the way. Any data you find is likely to be from the intrepid years or from an enthusiast who loads right up to the pressure limits and beyond so this could be an...

    Liked On: 12-05-2024, 08:14 PM

13. 
    aimless liked post by ROKTOY On thread : Howa rifle, good deal?

    Nice rifle. If you are considering it as your first centrefire, I say no. The recoil will put you off. The short barrel, as others have said, will make it loud. The suppressor will not take all...

    Liked On: 13-03-2024, 05:35 PM

14. 
    aimless liked post by gonetropo On thread : Howa rifle, good deal?

    17" for a 270 puts me off

    Liked On: 13-03-2024, 05:35 PM

15. 
    aimless liked post by rambo-6mmrem On thread : 6.5 120gn speer gold dot (6.5 Grendel) recovered

    2600fps MV Goat at 50m looking at me but enough of an angle to see the shoulder Went slightly higher than wanted took out the top of the lungs smashed the spine to bits and munted the front half...

    Liked On: 07-03-2024, 10:15 PM

Page 1 of 2 12 Last

• Jump to page: