akaroa1
Member

5277 Likes

Page 98 of 352 First ... 4884858687888990919293949596979899100101102103104105106107108109110111112148198 ... Last

• Jump to page:

1. 
   Micky Duck liked post by akaroa1 On thread : 303-25 reloading

   Yeetziy I have all the gear to do this Anneal 303 brass Form in 303-25 dies Trim to length Re anneal It's pretty easy Best done with good quality new brass Or with fired modern low round...

   Liked On: 12-06-2023, 05:43 PM

2. 
   Micky Duck liked post by akaroa1 On thread : 303-25 reloading

   A quick look through the more common 25 cals suggests that the 25-35 is maxed out at 2300 fps with 117 grain bullets The 250-3000 might get 2600 fps Your 303-25 might safely do 2700 fps And the...

   Liked On: 12-06-2023, 05:43 PM

3. 
   Micky Duck liked post by akaroa1 On thread : 303-25 reloading

   Yeetziy 226157

   Liked On: 12-06-2023, 05:42 PM

4. 
   Micky Duck liked post by akaroa1 On thread : 303-25 reloading

   Original Winchester 25-35 twist was 1:8" So fast twist is nothing new

   Liked On: 12-06-2023, 05:42 PM

5. 
   Micky Duck liked post by akaroa1 On thread : 303-25 reloading

   Nick Harvey shows max loads with 117 grains and 2600 to 2800 fps Pretty useful

   Liked On: 12-06-2023, 05:42 PM

6. 
   Micky Duck liked post by akaroa1 On thread : 303-25 reloading

   I have data in Nick Harvey's manual And dies Really easy to make brass from good 303 brass I brought the 303-25 dies to part form brass on the way to 303-22 I was Going to build a 25-35 and...

   Liked On: 12-06-2023, 05:41 PM

7. 
   Marty Henry liked post by akaroa1 On thread : Black powder repro guns (Italian).

   Wow you had a rare and valuable Paradox rifled barrel until the crack showed up

   Liked On: 12-06-2023, 03:26 PM

8. 
   Grey Kiwi liked post by akaroa1 On thread : Black powder repro guns (Italian).

   Wow you had a rare and valuable Paradox rifled barrel until the crack showed up

   Liked On: 12-06-2023, 02:51 PM

9. 
   Moa Hunter liked post by akaroa1 On thread : Euro Arms of America .45 black power info needed

   And before you load it and after you've cleaned the bore fire a couple of caps to clean the fire channel out Always fire a cap before loading after storage So you will also need a nipple...

   Liked On: 12-06-2023, 12:00 AM

10. 
    Marty Henry liked post by akaroa1 On thread : Longest continuously owned firearms

    And so it should It was usually your first rifle and maybe the last one you have because of those childhood memories

    Liked On: 11-06-2023, 10:43 PM

11. 
    blip liked post by akaroa1 On thread : 303-25 reloading

    Yeetziy 226157

    Liked On: 11-06-2023, 10:09 PM

12. 
    Micky Duck liked post by akaroa1 On thread : Euro Arms of America .45 black power info needed

    And before you load it and after you've cleaned the bore fire a couple of caps to clean the fire channel out Always fire a cap before loading after storage So you will also need a nipple...

    Liked On: 11-06-2023, 10:01 PM

13. 
    Micky Duck liked post by akaroa1 On thread : Longest continuously owned firearms

    The 30-40 U.S Govt went into service 131 years ago and I've just built a rifle in that caliber Just a click slower than a 308 Winchester I have just done a ballistic table for it and it has enough...

    Liked On: 11-06-2023, 08:19 PM

14. 
    Calvnz1 liked post by akaroa1 On thread : Longest continuously owned firearms

    And so it should It was usually your first rifle and maybe the last one you have because of those childhood memories

    Liked On: 11-06-2023, 07:51 PM

15. 
    Micky Duck liked post by akaroa1 On thread : Longest continuously owned firearms

    In the flintlock era from 1550s until 1820s A young man might buy a rifle and have it for the rest of his life Frequently it would be refreshed, involving cutting the rifling deeper or reaming up...

    Liked On: 11-06-2023, 06:54 PM

Page 98 of 352 First ... 4884858687888990919293949596979899100101102103104105106107108109110111112148198 ... Last

• Jump to page: