In terms of common threads there is the choice of 14x1 or 9/16x24 unless you want to go smaller which I would not do. Barrel diameter is too small to fit a 5/8x24 thread on Mine is threaded 14x1...
Liked On: 23-04-2020, 03:06 PM
Not sure what is considered Ideal, all mine are threaded 14x1 with barrel lengths ranging from 24, 22, 20 and 18 inches
Liked On: 23-04-2020, 03:06 PM
14x1 on mine. Recommended by Max.
Liked On: 23-04-2020, 03:04 PM
https://www.stuff.co.nz/national/health/coronavirus/121209323/coronavirus-level-3-ban-on-hunting-lifted A ban on hunting under Covid-19 alert level 3 has been lifted. Hunters will be able to...
Liked On: 23-04-2020, 12:25 PM
Correction on the 178 ELDX load its 64.5 grains RL 17 for 2950 typo error sorry, data on the targets is correct.
Liked On: 22-04-2020, 10:47 PM
2 budgies ;)
Liked On: 22-04-2020, 03:34 PM
Have a bit of data for H100V, gave good results for accuracy and velocity also, and was going to be an option for me if I couldn’t get Reloader 17.
Liked On: 21-04-2020, 02:35 PM
All of the loads are Seated to fit Mag, its a warm load if I use Norma Brass I drop the charge 2grains
Liked On: 21-04-2020, 02:10 PM
Tikka 20 inch 300 wsm load data and chronographed over lab radar. Winchester Cases Fed / 215 Magnum Primer 168 Amax 66.5 grains RL 17 3050 178 Eldx 65.5 grains RL 17 2950 190 Berger VLD 62...
Liked On: 21-04-2020, 01:54 PM
200gr ELD X in my 300wsm 61.5gr RL17 2940fps 22in barrel Given as a comparison, you should get a bit faster with the 178g.
Liked On: 21-04-2020, 01:15 PM
All good. You will be hanging out to get it. 3 weeks should see you good anyway.
Liked On: 21-04-2020, 12:34 PM
I have just been through this loading for a mates rifle which is a 20" shooting 178 ELDM I tried Hodgdon superprofrmance and RL26. I only kept the info from the finished loads Hodgdon...
Liked On: 21-04-2020, 11:28 AM
This is a .30 cal 150TTSX @ 300 yds. 3150 fps. They work just fine up close. In the vid it looks like I hit it a bit back but I was angling for where I wanted the bullet to go. It went right...
Liked On: 20-04-2020, 05:48 PM
300WSM is a bit like 284 in the sense that it's designed to work in a short action but it really comes alive when you can seat the bullets back out towards long action lengths. With that in mind,...
Liked On: 20-04-2020, 01:17 PM
I've given my Model 7 a rebirth From a 260imp to 6XC in a 1:7.5 26 inch heavy barrel. PT&G detachable bottom metal with MDT steel mag. Gunworks 3 port brake. I've put the original factory...
Liked On: 20-04-2020, 01:07 PM