Apocalypticaman
Member

78 Likes

Page 1 of 6 123456 Last

• Jump to page:

1. 
   Apocalypticaman liked post by lau lau On thread : Cheap .22LR suppressor versus expensive - is there a noticeable difference?

   I've got the cheapest one humping and fishing sell. Use it on my Tacsol semi and cci std velocity or norma tac ammo without any issues

   Liked On: Yesterday, 10:31 PM

2. 
   Apocalypticaman liked post by Deadeye dick On thread : Cheap .22LR suppressor versus expensive - is there a noticeable difference?

   Recently picked up a CZ452 with one of the cheap stealth brand cans. I have a hushpower, went to the range, subs through both. Hard to say if there was any difference. As others have said, the newer,...

   Liked On: 05-05-2025, 11:56 AM

3. 
   Apocalypticaman liked post by No.3 On thread : Cheap .22LR suppressor versus expensive - is there a noticeable difference?

   The other benefit with newer monolithic designed cans is less moving parts so not so much noise if you whack them on something. The older style 'spring' cans are basically for subs only, the newer...

   Liked On: 05-05-2025, 11:56 AM

4. 
   Apocalypticaman liked post by blip On thread : Cheap .22LR suppressor versus expensive - is there a noticeable difference?

   Got cheap and expencive youd need decent sound measuring gear to tell any difference

   Liked On: 05-05-2025, 11:56 AM

5. 
   Apocalypticaman liked post by No.3 On thread : Built my first handloading bench using recycled pallets

   Not sure you'll really need to worry about the steel plate - unless you're looking to resize cannon shells. I'd try out what you have and see what it goes like, as I have my presses bolted to 25mm...

   Liked On: 13-02-2025, 04:08 PM

6. 
   Apocalypticaman liked post by longshot On thread : Getting a start in reloading

   At least you’re making the most of it. I wouldn’t think many have the luxury of a reloading bench in their lounge.

   Liked On: 13-02-2025, 08:29 AM

7. 
   Apocalypticaman liked post by Bos On thread : Getting a start in reloading

   Nothing wrong with that, especially in the lounge! Before you do anything else, get a 400 x 300 piece of steel plate and bolt it to the bench, then bolt your press right through the plate and...

   Liked On: 13-02-2025, 08:28 AM

8. 
   Apocalypticaman liked post by No.3 On thread : Built my first handloading bench using recycled pallets

   Just a word from those that have made the cock up before, spilled powder is an arse on carpet. A real arse... And powder in a vacuum cleaner often gets spicy, and when the vacuum cleaner gets...

   Liked On: 11-02-2025, 09:01 PM

9. 
   Apocalypticaman liked post by BK10 On thread : Getting a start in reloading

   Thanks for all your help, that will get me on my way as I'm a bit of a researcher before I do any practical things, Also cant wait to tell my misses that the reloading bench goes in the lounge!!

   Liked On: 07-02-2025, 08:04 PM

10. 
    Apocalypticaman liked post by blip On thread : Built my first handloading bench using recycled pallets

    Wife always says my work bench in the garage is covered in crap and she cant put anything on it......it works

    Liked On: 07-02-2025, 08:03 PM

11. 
    Apocalypticaman liked post by blip On thread : Built my first handloading bench using recycled pallets

    looks good. if its anything like our place any spare space seems to attract a pile of crap that never moves once its there :pissed off:

    Liked On: 07-02-2025, 06:49 AM

12. 
    Apocalypticaman liked post by Oldbloke On thread : Getting a start in reloading

    You must be single? Lol

    Liked On: 06-02-2025, 10:17 PM

13. 
    Apocalypticaman liked post by John Duxbury On thread : Load data for .44-40 WCF using AR2207?

    Hi have a lot of experience with the .44-40. The main smokeless load for the .44-40 is using 2207 (H4198 in American) and 26 grains. This will get you around 1300 fps which is what a .44-40...

    Liked On: 06-02-2025, 06:37 PM

14. 
    Apocalypticaman liked post by Kopua Cowboy On thread : Traveling with a rifle

    Police have very little storage available and are unreasonably suspicious- so you are likely better to give it to a stranger vouched for by other strangers on the internet :thumbsup:

    Liked On: 25-03-2022, 10:46 AM

15. 
    Apocalypticaman liked post by tetawa On thread : Looking for 6.5prc

    Freight from here would kill any deal, better to try a USA forum.

    Liked On: 21-02-2022, 02:25 PM

Page 1 of 6 123456 Last

• Jump to page: