AR7
Member

20 Likes

Page 1 of 2 12 Last

• Jump to page:

1. 
   AR7 liked post by Fssprecision On thread : Ruger 10/22 rotary mag issues

   Clean is the key and I have always used this principal to re tension the spring with no feeding problems.. Using one of the flat hexagon edges as reference, that edge must be turned clockwise...

   Liked On: 27-04-2024, 05:32 PM

2. 
   AR7 liked post by robhughes-games On thread : Kiwi made howa mini bottom metal

   I've put a far amount of time into getting theses where I think they are good to go. No more dropping factory mags accidentally. The release is built to be enclosed and protected. It also is...

   Liked On: 24-04-2024, 08:45 AM

3. 
   AR7 liked post by Fssprecision On thread : RPR RIMFIRE RAIL SLOTS NOT DEEP ENOUGH

   I have sorted a few rails with shallow rail slots, stayer was one I remember. Really want to do on a mill to do properly

   Liked On: 20-04-2024, 08:18 PM

4. 
   AR7 liked post by Fssprecision On thread : 50 Cal can

   You don't see these everyday, a mate got hold of a genuine 50 Cal suppressor, todays task was to make an adaptor to fit it to his gun. Will be interesting to see/hear how it performs, this is one...

   Liked On: 06-04-2024, 09:26 AM

5. 
   AR7 liked post by Fssprecision On thread : First Thompson 10/22 Done

   Its been a project I have been working on for a few years now as time allowed. Well the first one is done and I have to say I am very pleased how it came out, an absolute heap of work but I think...

   Liked On: 14-03-2024, 08:11 PM

6. 
   AR7 liked post by Fssprecision On thread : Quietest .22 Suppressor ?

   Hi All, first I would say to qualify my comments I have been designing, developing and manufacturing special suppressors for many years including a very successful venture with my fully suppressed...

   Liked On: 09-03-2024, 08:38 PM

7. 
   AR7 liked post by Fssprecision On thread : Dargaville Field Days

   Hi All, just a note to say I will be at the Dargaville Field Days, I will be on the stand with PARD/Owl Optics...stand No. OL2. Come and say hello, I will have a dummy version of the suppressed...

   Liked On: 29-02-2024, 01:41 PM

8. 
   AR7 liked post by Fssprecision On thread : Using large suppressor for small calibre

   It will have little effect on accuracy but if it is for a larger calibre it just won't be so efficient. Given that a little can for a 17 are not that expensive I would recommend getting one for gun...

   Liked On: 03-01-2024, 04:49 PM

9. 
   AR7 liked post by Fssprecision On thread : Another suppressor question

   So a few things to check, before you necessarily jump on the suppressor. The thread on the muzzle is quite often the biggest variable. Is the thread in good condition. Is it perfectly true to...

   Liked On: 11-12-2023, 12:11 PM

10. 
    AR7 liked post by Fssprecision On thread : Tricky Extractor Remake

    Now this was a challenging little item to make, it's an extractor for an old French military rifle, so lucky to had an original to copy. Not something I want to make too many more of ha ha ha ...

    Liked On: 24-11-2023, 07:05 PM

11. 
    AR7 liked post by schwen On thread : Useing the firearms register

    Forced into registering because I bought a new gun. Tried to register the re-barrelled single shot rifle as 45 ACP (which was stamped on the receiver). Not listed as an option in their drop-down menu...

    Liked On: 23-11-2023, 09:41 AM

12. 
    AR7 liked post by Fssprecision On thread : Suppressed Lever Action

    So here you go everyone, following my question regarding what do Pig hunters want, I had a fair bit of interest in an idea for a cut down, suppressed lever action. To that end I got a brand new...

    Liked On: 18-11-2023, 05:04 PM

13. 
    AR7 liked post by Micky Duck On thread : quiet .224

    In the past its often been asked how to create a subsonic load for the .223 while poopoohing the idea due to piss poor terminal effect myself,fellas pointed out its basically just a subsonic .22lr...

    Liked On: 05-11-2023, 07:20 PM

14. 
    AR7 liked post by Mintie On thread : Russian firearm appreciation thread

    I've always had a bit of a thing for Russian rifles, the design can be a little agricultural at times but they are always well thought out and sturdily built - engineered to be abused and still show...

    Liked On: 01-11-2023, 07:16 AM

15. 
    AR7 liked post by Fssprecision On thread : What do Pig hunters want ?

    So I am think of making another special in the range to go with the suppressed 410s etc. and I had a lot of pig hunters at the Sika show ask if my suppressed 410s are good for solids (they are just...

    Liked On: 31-10-2023, 07:19 AM

Page 1 of 2 12 Last

• Jump to page: