Yes, when purchasing a rifle package one would expect everything to be fitted correctly. In this case a staff member made a mistake. The manager of outlet took ownership of the problem and rectified...
Liked On: 31-01-2025, 06:07 AM
Find a very slim screwdriver or the like, something very slim and slip it in between the teeth and the top and eventually the bottom of the inside of the zipper pull. These are a pain in the bum,...
Liked On: 30-01-2025, 04:36 PM
Implying "said seller" makes more mistakes than other "sellers" is creative writing which suits your cause. They may well make more mistakes than the average Gunshop. But I would suggests that their...
Liked On: 30-01-2025, 01:30 PM
So after following this thread and seeing some interesting opinions I thought Id throw it out there. So who is ultimatley resposible for checking your gear? You they guy at the gun shop, someone...
Liked On: 30-01-2025, 01:29 PM
Don't give it oxygen ...
Liked On: 30-01-2025, 11:55 AM
Hi everyone, This topic comes up from time to time, so I thought I’d put together a post to help clarify the issue. Unfortunately, several different thread sizes can screw onto each other,...
Liked On: 30-01-2025, 10:27 AM
It's never an even distribution of pellets and it changes shot to shot, patterning especially on paper will show you that. Sometimes there are holes that an animal or clay could slip through.
Liked On: 30-01-2025, 07:55 AM
Barry....the #3 is my favourite for bunnies but I've shot a hell of a lot of game with the old Winchester superx in #2. Three pellets in cardboard box says you missed it. Get bigger box or shoot a...
Liked On: 29-01-2025, 06:12 PM
Good to see a machiness tool maker on here.I just rely on gun smith,if it don't work I take it back.Havnt had to do that yet in the last 20yrs.Had no problems with GC in the last 20yrs either.
Liked On: 29-01-2025, 02:31 PM
And for all the guys that like to bag gc and tell them how to do it, Im yet to see any of them actually do it them selves and show us how its done....
Liked On: 29-01-2025, 02:30 PM
I hope this is not the case, it would be far better if we all made our own submissions without sounding like we're all saying the same things in the same words. I did mine last night, it will be all...
Liked On: 29-01-2025, 08:50 AM
Good on you for front footing this with your reply on here. Credit where it's due.
Liked On: 29-01-2025, 07:08 AM
,Had to help my son same senerio, heat gun and a 25mm putty knife. Heat putty knife and work into the silicon takes a while but you will get there in the end.
Liked On: 28-01-2025, 07:48 PM
Swazi Tahr XP if you like a pull over so less leaks at the front Swazi Wapiti XP if you want a front opening and bigger pockets
Liked On: 28-01-2025, 06:56 AM
The statements about numbers are very out of date. DOC staff are very helpful and knowledgeable, once I’ve decided where I’m going to hunt, I contact the local office and talk to someone about the...
Liked On: 27-01-2025, 01:10 PM