Top one is defiantly a Japanese cartridge, 7.7jap should be 79.6mm long give or take and 6.5jap should be 76mm give or take. Calliper the projo and that will give you your answer. But, 100%...
Liked On: 10-03-2025, 08:50 PM
Seeking any landowners in the manawatu who may be open to allowing me to dial in my eye on clay birds, and general patterning for my buckshot, an additional bonus if you have any small game that...
Liked On: 08-03-2025, 09:08 PM
Yep. Have over 800 pulled rounds (cases,primers,projos) some young fella was conned into by some old senile some the range into dumping the powder out of as they were “unsafe” as they are “old” ...
Liked On: 15-02-2025, 04:47 PM
Valleyhunter The second rifle with the goop on the stock is a Styer M95 stutzen carbine. Should be chambered in 8x56R and was issued to the austro hungarian empire during WW1 For the first...
Liked On: 31-01-2025, 10:42 AM
I think your looking a bit deep in the pot there, I know of others, and myself included who have had to ring up and amend serials due to partial, incomplete/illegible or none present at the time of...
Liked On: 30-01-2025, 10:28 AM
I think your looking a bit deep in the pot there, I know of others, and myself included who have had to ring up and amend serials due to partial, incomplete/illegible or none present at the time of...
Liked On: 30-01-2025, 09:45 AM
I think your looking a bit deep in the pot there, I know of others, and myself included who have had to ring up and amend serials due to partial, incomplete/illegible or none present at the time of...
Liked On: 30-01-2025, 07:44 AM
I think your looking a bit deep in the pot there, I know of others, and myself included who have had to ring up and amend serials due to partial, incomplete/illegible or none present at the time of...
Liked On: 30-01-2025, 07:22 AM
I think your looking a bit deep in the pot there, I know of others, and myself included who have had to ring up and amend serials due to partial, incomplete/illegible or none present at the time of...
Liked On: 30-01-2025, 07:20 AM
Top one is defiantly a Japanese cartridge, 7.7jap should be 79.6mm long give or take and 6.5jap should be 76mm give or take. Calliper the projo and that will give you your answer. But, 100%...
Liked On: 27-01-2025, 10:46 PM
Valleyhunter The second rifle with the goop on the stock is a Styer M95 stutzen carbine. Should be chambered in 8x56R and was issued to the austro hungarian empire during WW1 For the first...
Liked On: 27-01-2025, 08:30 PM
Valleyhunter The second rifle with the goop on the stock is a Styer M95 stutzen carbine. Should be chambered in 8x56R and was issued to the austro hungarian empire during WW1 For the first...
Liked On: 27-01-2025, 04:09 PM
https://www.nzherald.co.nz/nz/major-gun-store-hunting-fishing-calls-for-online-sales-ban-following-christchurch-mosque-terror-attacks/JHOZAZF4ZBIMSLC5DZ2VH3TBLE/ 263773 I’ll get ahead of...
Liked On: 10-01-2025, 11:46 AM
Looking at getting one similar to the mini elude I really like my howa mini, excellent for the close bush work, but a superlite + chassis IMO is about the end all for a customisable rifle used...
Liked On: 25-12-2024, 09:14 PM
I have been present for a similar process pre 2019 for two No3 mk1* rifles, the requirement was any and all load bearing parts and any moving components must be structurally compromised and...
Liked On: 20-12-2024, 07:26 PM