stagstalker what are you running in your 260? And what speed from the 18inch barrel? Awesome video
Liked On: 20-12-2022, 10:23 PM
johnd I have just started using Gordon’s reloading tool, and you say for this example if he used 58.95grains he would have a accuracy node, what data on Gordon’s reloading tool says that it is a...
Liked On: 03-10-2020, 06:37 PM
I got a sample pack of the 69 targex. And threw them together with 2208. Produced a nice group. So have ordered a full pack and will run them over the crony and then try them out on some game. I...
Liked On: 16-08-2020, 01:16 PM
I got a sample pack of the 69 targex. And threw them together with 2208. Produced a nice group. So have ordered a full pack and will run them over the crony and then try them out on some game. I...
Liked On: 16-08-2020, 01:05 PM
Awesome guys. Thanks for the info. I’m going to be loading them in a 20 inch barrel and a 22 inch for a mate. So should be able to get 2500 plus out of them. Thanks shearer for the offer, but I will...
Liked On: 31-07-2020, 07:18 PM
Feral did you have any luck with the 208? Mine wasn’t super successful, ranged from .6 - 2 inches. So going to have a play with .6 load. Buts it’s pretty hot. No pressure though
Liked On: 20-06-2020, 06:50 PM
Interesting. Have heard great stuff about the 208 eldm. If you do end up selling them. Let me know. I would be interested in them. Will report back after the weekend with how my loads go.
Liked On: 12-06-2020, 11:41 AM
This link is also helpful for setting the indexing up so it lines up correctly https://youtu.be/zRBeoqYdr74
Liked On: 04-05-2020, 08:25 PM
Cordite thanks for that info. Have had a look and a 3mm drill bit simply slides into the 308 seating stem well past where the stem is contacting the bullet. So maybe have to go to 3.5-4 mm
Liked On: 25-04-2020, 11:40 AM