Checked the protrusion, looked the same if not more than my other rifle so don't think that is the problem. Pin tip isn't mushroomed. See pic below though, the firing pin hole is definitely bigger...
Liked On: 29-04-2022, 06:01 PM
I've disassembled the bolt and degreased/cleaned it and very lightly oiled it before reassembly. There was a lot of oil in there so perhaps the excess oil was causing a hydraulic effect preventing...
Liked On: 22-04-2022, 09:45 AM
Thanks for the feedback, think i’ll go with 1/2-28 Sent from my iPhone using Tapatalk
Liked On: 31-12-2019, 06:24 AM
Anyone who’s thinking of buying one of these torches, just do it! I picked up a 2X from Mudgripz last week and I’m extremely impressed. Was skeptical it would outdo a lightforce 170 (halogen) running...
Liked On: 08-06-2019, 10:57 PM
Anyone who’s thinking of buying one of these torches, just do it! I picked up a 2X from Mudgripz last week and I’m extremely impressed. Was skeptical it would outdo a lightforce 170 (halogen) running...
Liked On: 08-06-2019, 10:25 PM
Anyone who’s thinking of buying one of these torches, just do it! I picked up a 2X from Mudgripz last week and I’m extremely impressed. Was skeptical it would outdo a lightforce 170 (halogen) running...
Liked On: 08-06-2019, 09:15 PM
Hi all, I recently made some targets which I believe are ideal for sighting in your rifle or testing loads/grouping. I'm going to make some more especially one with multiple targets on one page...
Liked On: 25-10-2017, 05:59 AM
Hi all, I recently made some targets which I believe are ideal for sighting in your rifle or testing loads/grouping. I'm going to make some more especially one with multiple targets on one page...
Liked On: 20-10-2017, 06:36 PM
Nibblet, as in multiple targets in a grid with say 2 or 3 MOA spacing? I briefly read up on box testing but i've never done it before.
Liked On: 20-10-2017, 05:59 PM
Hi all, I recently made some targets which I believe are ideal for sighting in your rifle or testing loads/grouping. I'm going to make some more especially one with multiple targets on one page...
Liked On: 20-10-2017, 05:51 PM
For anyone interested, my boots arrived today and i'm really happy with them. Although they took 2-3 weeks to arrive once they were back in stock, my total cost including shipping was NZ$380 compared...
Liked On: 11-10-2017, 11:46 AM
For anyone interested, my boots arrived today and i'm really happy with them. Although they took 2-3 weeks to arrive once they were back in stock, my total cost including shipping was NZ$380 compared...
Liked On: 11-10-2017, 11:27 AM
I've already paid for them so the price is locked in at $380. CT Sent from my iPhone using Tapatalk
Liked On: 20-09-2017, 03:15 PM
Just thought i'd give a quick shout out to Hugh Bradley in Alexandra who is a gunsmith and makes his own custom barrels. I recently used his services for a custom chrome-moly/blued barrel for a...
Liked On: 11-04-2017, 12:11 AM
Just thought i'd give a quick shout out to Hugh Bradley in Alexandra who is a gunsmith and makes his own custom barrels. I recently used his services for a custom chrome-moly/blued barrel for a...
Liked On: 09-04-2017, 06:33 PM