It makes you wonder if the Russians actually had a clear plan and objectives in starting the war in Ukraine. Perhaps the believed their own propaganda over the oppressed Ukrainians wanting a return...
Liked On: 05-09-2022, 09:53 AM
They will probably be soaking up all plant capacity making the ball powder grades for .50, 20mm and 30mm cartridges. Consumption of those caliber components must be out through the roof in the EU...
Liked On: 05-09-2022, 09:53 AM
After five years of using factory ammo in my 7rm , i started reloading for it a few months ago and with the limited choice of components i ended up with a load of 71.5 gr of IMR 8133 behind a 175gr...
Liked On: 04-09-2022, 07:52 PM
grandpamac if you go onto the Hodgdon site and click on any of the Enduron powders and scroll to the bottom of the "Product Overview" you will see "This product was discontinued in 2022".
Liked On: 04-09-2022, 07:49 PM
No sorry mate, my neighbour just brought them over to show me so I thought I would share them with guys that might find them interesting.
Liked On: 04-09-2022, 01:16 AM
Pg 5-6 about ball powders is very interesting, esp that ball powders should never be compressed because of potential catastrophic pressure spike
Liked On: 03-09-2022, 11:20 AM
69gr TMK at 307yd. MV of 3050. 205139 Centre shoulder shot dropped him on the spot. Tried to get up very briefly - a few seconds at most and no follow up required. Massive trauma behind the...
Liked On: 02-09-2022, 03:31 AM
Well I'm going to disagree on the lube bit. I've used just about everything else commercially available in NZ. I've had issues with all of them no doubt in some instances thru user ineptitude but I...
Liked On: 31-08-2022, 10:23 PM
Plus with a (superior) model 7 you get a drop box max not a silly plastic mag you have to take out and load bullets into. You also get at true short action not a long action with a short bolt stop. ...
Liked On: 31-08-2022, 09:24 PM
Are they made from gold?
Liked On: 31-08-2022, 09:21 PM
The scale is vastly improved by adding a couple or three disc magnets the size of the old 50c coin. They will click onto the offside of the end where the pointer is and vastly improve the magnetic...
Liked On: 31-08-2022, 06:49 PM
Interesting review. Seems OK, but I'd expect better for the kind of money they will want for it. https://www.youtube.com/watch?v=pa9UH6Ms-wA&t=617s&ab_channel=UnevenTerrainOutdoors
Liked On: 31-08-2022, 10:19 AM
Just curious is there anyone in NZ that would/could fit dual ejectors on an a7 bolt ? Same issue with my a7, have seen on usa forums dual ejectors fitted as a solution as it seems to force the...
Liked On: 31-08-2022, 09:23 AM
Yeah it certainly works better than the factory setup! I fitted it myself, it was a bit of a guessing game as to where exactly to locate it for best ejection and you are limited by the recoil lug...
Liked On: 31-08-2022, 09:23 AM
Used a couple of model 7 7mmsaum cut to 16 inch 3000fps with 140 AB or NBT Factory mod 7 saum barrels shortened often return exceptional accuracy that they lacked at their factory length
Liked On: 31-08-2022, 09:22 AM