caberslash
Member

2703 Likes

Page 52 of 181 First ... 23839404142434445464748495051525354555657585960616263646566102152 ... Last

• Jump to page:

1. 
   caberslash liked post by Ftx325 On thread : Best quick release torch mount

   yeah sorry mate didn't explain very well, I meant I have that rail set up mounted on the scope but the torch is mounted in a scope ring that I hand tighten to the rail , rather than the 'proper'...

   Liked On: 16-08-2022, 06:01 PM

2. 
   caberslash liked post by Mills On thread : trademe cheek rests?

   Foam and tape does the job. Plus it’s completely reversible

   Liked On: 16-08-2022, 05:59 PM

3. 
   caberslash liked post by kotuku On thread : trademe cheek rests?

   Made my own -a replica wooden one for the sporter butt on my no4mk1.303 carved from a piece of radiata screwed on .my 7.62x39 and bubba sister the.223 have leather ones .I made these from an old...

   Liked On: 16-08-2022, 05:59 PM

4. 
   caberslash liked post by Cigar On thread : city kids and shooting

   Good luck, I hope it straightens him out. Decades ago the shepherd on the family farm used to get sent his rellies from South Auckland who were causing trouble. One of them didn't work out so well....

   Liked On: 16-08-2022, 10:51 AM

5. 
   caberslash liked post by chindit On thread : city kids and shooting

   Give the kid a chance. Living with uncle Ryan may just be the thing the lad requires to realize there is more to life than gangs

   Liked On: 16-08-2022, 10:49 AM

6. 
   caberslash liked post by Ryan_Songhurst On thread : city kids and shooting

   One of my staff has her young nephew down here from Whangarei at the moment trying to keep him away from the gangs. He's just gone 17 and is probably a good kid under his hard exterior. We are going...

   Liked On: 16-08-2022, 10:48 AM

7. 
   caberslash liked post by No.3 On thread : Ammunition shortage

   FMJ is all about placement. Get them in the right place and no problemo. The best most destructive bullet in a spot that isn't immediately vital will fail to kill cleanly...

   Liked On: 16-08-2022, 10:46 AM

8. 
   caberslash liked post by 7mmsaum On thread : Neck/bullet welding?

   It’s called galvanic corrosion Common with dissimilar metals in long term contact with each other As mentioned seat deeper to “ crack” the weld then pull with collet puller If you assemble...

   Liked On: 14-08-2022, 09:03 PM

9. 
   caberslash liked post by Cigar On thread : Neck/bullet welding?

   Yeah, it does happen, but I haven't heard of it to point of ripping projectiles in half! The trick is to push the projectiles a slight amount deeper in a seating die to break the bond, then they...

   Liked On: 14-08-2022, 09:03 PM

10. 
    caberslash liked post by Tedz50 On thread : Cartridge and Rifle Camberings Availability.

    203755 I do not know what parallel universe you grew up in but in my youth we used semi-auto shotguns and bought CAC ammo by the case,22 and 22mag by the brick.I never saw a single barrel shotgun in...

    Liked On: 14-08-2022, 11:38 AM

11. 
    caberslash liked post by Friwi On thread : Chassis for hunting, why are they not more common in nz?

    I hunted with a rem 7 in an mdt lss, the lightest chassis rig you could get at at the time . Accuracy was ok but not that great with the magpul colapsible stock .but I switched quickly to carbon as...

    Liked On: 13-08-2022, 07:08 PM

12. 
    caberslash liked post by nor-west On thread : Chassis for hunting, why are they not more common in nz?

    He reckons anyone under 70 is soft, got something to do with carrying machine guns and ammo belts in the Army.

    Liked On: 13-08-2022, 07:08 PM

13. 
    caberslash liked post by Tahr On thread : Chassis for hunting, why are they not more common in nz?

    Real men use them. Brian 203648

    Liked On: 13-08-2022, 07:07 PM

14. 
    caberslash liked post by grandpamac On thread : neck sizing

    Greetings All, After decades of neck sizing I have recently moved to full length sizing using the Redding competition shellholders for all but my low pressure loads. I also anneal every other load....

    Liked On: 13-08-2022, 10:45 AM

15. 
    caberslash liked post by 25/08 IMP On thread : neck sizing

    I used to only neck size all my cases for years. This is the reason i own Hornady dies as their neck dies are universal ie a 22 cal die will size any .223 dia sized neck. Sent from my CPH2145...

    Liked On: 13-08-2022, 10:42 AM

Page 52 of 181 First ... 23839404142434445464748495051525354555657585960616263646566102152 ... Last

• Jump to page: