The next step was the bolt. Norinco's machining process is shit. The roughness is legendary. So after about 4hrs with 800 then 1200 grit wet and dry followed by 2hrs of using a Dremel and Autosol...
Liked On: 16-04-2014, 11:52 PM
No worries rushy ;) When I get more info, that relates to us here, I'll post it up.
Liked On: 16-04-2014, 08:42 PM
The stock is finished :) 4 coats of Danish Oil and a light polish up using a terry cloth and it has come up quite good, if I do say so myself. I can polish it further with a wax if I want, but I...
Liked On: 16-04-2014, 08:18 PM
These packs are real nice to use. Very easy to load and unload rifle from scabbard. Vorn Hunting Packs Hunt Smart (http://huntsmart.co.nz/)
Liked On: 14-04-2014, 11:26 PM
Hopefully it's a simple case of checking and cleaning the excess off. But if they require the rifles to be looked at by a smithy, there is going to be a huge backlog.
Liked On: 12-04-2014, 05:46 PM
Been having problems with site all day. Even via tapatalk I couldn't post anything. Same error messages kept popping up. Back to normal for me now though.
Liked On: 12-04-2014, 05:03 PM
The next step was the bolt. Norinco's machining process is shit. The roughness is legendary. So after about 4hrs with 800 then 1200 grit wet and dry followed by 2hrs of using a Dremel and Autosol...
Liked On: 12-04-2014, 09:15 AM
The next step was the bolt. Norinco's machining process is shit. The roughness is legendary. So after about 4hrs with 800 then 1200 grit wet and dry followed by 2hrs of using a Dremel and Autosol...
Liked On: 09-04-2014, 12:10 PM
The next step was the bolt. Norinco's machining process is shit. The roughness is legendary. So after about 4hrs with 800 then 1200 grit wet and dry followed by 2hrs of using a Dremel and Autosol...
Liked On: 08-04-2014, 10:10 PM
After holding it for a day or 2 I decided the stock needed stripping and a proper finish done. Rifle as I got it http://i964.photobucket.com/albums/ae121/CEMEMOTORSPORTS/Hunting/DSCF0756.jpg...
Liked On: 08-04-2014, 10:09 PM
After holding it for a day or 2 I decided the stock needed stripping and a proper finish done. Rifle as I got it http://i964.photobucket.com/albums/ae121/CEMEMOTORSPORTS/Hunting/DSCF0756.jpg...
Liked On: 06-04-2014, 09:57 PM
I do.....and approx 9 times over when I register, buy RUC's, and fill my truck with diesel. Not to mention the 3 forms of tax on the income I earn. Which is all going up faster than increases in...
Liked On: 04-04-2014, 11:52 PM
Trouble with bum bags is they end up sliding off your waist and/or pull your pants down. You can use suspenders to hold them up, or do what I did and sew some clips onto the bum bag and onto my...
Liked On: 28-03-2014, 07:21 PM
Synthetic engine oil 5W30 is what I'm using.
Liked On: 23-03-2014, 08:54 PM
A Qquick report.... Awesome event yet again!! Well done SCRSC!! Our team did quite well. Last minute access issues caused a couple of headaches, but we managed to sneak onto a place at the...
Liked On: 19-03-2014, 03:32 PM