Cartman
Member

245 Likes

Page 1 of 17 123456789101112131415 ... Last

• Jump to page:

1. 
   Cartman liked post by Easytiger On thread : Westies hut.

   I have been to Westies a few times. It would be a very bad place to be with a boat in bad weather. Walking in to Westies is days of mud and washed out bridges. Chopper is the only way I would...

   Liked On: 04-02-2024, 10:44 AM

2. 
   Cartman liked post by Shamus_ On thread : 4x4 accessories

   A decent shovel is a good start

   Liked On: 17-11-2023, 01:44 PM

3. 
   Cartman liked post by Trout On thread : Norinco JW15A 22 LR

   Drill a 1/2 hole in the end of plastic stock and fill up with liquid polystyrene.Let it set as it expands out of yr drilled hole,file off and tape over hole.Your stock will be a lot stiffer.:D

   Liked On: 16-11-2023, 08:52 PM

4. 
   Cartman liked post by Beetroot On thread : WTF Bubba

   So found this gem on Trademe today.... https://www.trademe.co.nz/a/marketplace/sports/hunting-shooting/rifles/centrefire/listing/4410602477 Stripped screw in receiver, bent barrel, barrel looks...

   Liked On: 09-11-2023, 11:58 AM

5. 
   Cartman liked post by Trout On thread : Fiocchi .270 ammo.

   Mate of mine shot a couple of deer with it out of a 270 about 150yds away.Deer fell over and didnt move.Bulk buy from GC chch,5 pkts n cheap.

   Liked On: 26-10-2023, 11:20 AM

6. 
   Cartman liked post by TLB On thread : Fiocchi .270 ammo.

   It works fine. Definitely not a barrel stretching round though. We pulled some and I can't remember what the powder variation was but it was quite considerable. When one of the big chain stores...

   Liked On: 25-10-2023, 09:37 PM

7. 
   Cartman liked post by Makros On thread : Learned something today about suppressors.

   If there is evidence of previous baffle strike this could be the reason for the poor accuracy even if it is no longer striking. Uneven pressure around the projectile during freebore (left the barrel,...

   Liked On: 20-10-2023, 10:07 AM

8. 
   Cartman liked post by BRADS On thread : 70 series - what mod or what mod NOT to get

   Good post. I run lower pressures, but generally, in a bead lock, 8-10psi on landcruiser and safaris make them very capable. 2 psi on the rally truck has some new a/t tires to try out this weekend ...

   Liked On: 11-10-2023, 09:27 PM

9. 
   Cartman liked post by Blackfern On thread : Prado vs Surf

   My father in law had a 3.2 Pajero over in Aussie for years. Took it all over the top of Aussie towing a big caravan. Never had an issue with it. Reckons the 3.2 Pajero were the only 4wd that you...

   Liked On: 09-10-2023, 07:07 PM

10. 
    Cartman liked post by Moutere On thread : Half cock or safety

    Half cock is an outdated generational hand me down, just like yards.

    Liked On: 28-07-2023, 02:37 PM

11. 
    Cartman liked post by Ryan_Songhurst On thread : Half cock or safety

    Such a retarded mindset on the one hand saying you don't trust a safety and on the other hand having no problem getting about with a half closed bolt

    Liked On: 28-07-2023, 02:36 PM

12. 
    Cartman liked post by 7mm tragic On thread : Half cock or safety

    Just to be clear, the use of safety or half cock is about ensuring you don't have an accidental discharge. All the other rules apply all of the time even when no ammunition is present in the rifle....

    Liked On: 28-07-2023, 02:34 PM

13. 
    Cartman liked post by Fatberg On thread : YouTube star "Rogee" the great New Zealand hunting 'n' shooting ambassador.

    Have a look at Clarke Boys Hunting on YouTube. They have all their front teeth and aren’t gang members. Seem like pretty straight laced fullas. Here’s a pig hunting video they just put out that I...

    Liked On: 04-07-2023, 09:29 PM

14. 
    Cartman liked post by ANTSMAN On thread : YouTube star "Rogee" the great New Zealand hunting 'n' shooting ambassador.

    accurate.

    Liked On: 04-07-2023, 06:54 PM

15. 
    Cartman liked post by sneeze On thread : 22-250 twist rate

    I think you mean "moot" point. A mute point is somewhat difficult to make, maybe involving sign language.

    Liked On: 28-06-2023, 12:21 PM

Page 1 of 17 123456789101112131415 ... Last

• Jump to page: