chainsaw
Member

2760 Likes

Page 26 of 184 First ... 121314151617181920212223242526272829303132333435363738394076126 ... Last

• Jump to page:

1. 
   dannyb liked post by chainsaw On thread : Scope choice for .375 H&H

   What’s your budget ? Have you considered 2-10 or 2-12x scopes? I’d personally go for a 40-44 objective . Tried some 1- 4 x 25 and 30 but not my cup of tea. Even at 100 yards I found the lack of...

   Liked On: 04-03-2023, 08:41 AM

2. 
   BRADS liked post by chainsaw On thread : Lone peak Razor ti barrel thread

   Yes I thought they were same as REM700 for tenon thread. He might be better off going 7mmPRC once brass is available here.

   Liked On: 03-03-2023, 11:40 AM

3. 
   ANTSMAN liked post by chainsaw On thread : Lone peak Razor ti barrel thread

   Yes I thought they were same as REM700 for tenon thread. He might be better off going 7mmPRC once brass is available here.

   Liked On: 03-03-2023, 11:29 AM

4. 
   7mmsaum liked post by chainsaw On thread : Falling into the same old rut

   Hunting reds in one CNI spot I’ve hunted quite a few times (bush with big clearings) I too observe the numbers spotted drop off dramatically after 2 days. They don’t like sharing their patch with...

   Liked On: 02-03-2023, 03:30 PM

5. 
   Roarless20 liked post by chainsaw On thread : Another Paulownia CF stock build

   My second effort, this one for a REM Model 7 708. Pretty much copy of Model 7 factory stock but with a longer LOP to suit the shooter (long arms) plus a slightly raised comb and a check swell. ...

   Liked On: 01-03-2023, 03:19 PM

6. 
   will.i.em liked post by chainsaw On thread : Can I swap a bolt between two rifles?

   There’s a REM700 bolt SA 308 for sale on TardMe at present

   Liked On: 28-02-2023, 09:45 PM

7. 
   makka liked post by chainsaw On thread : Another Paulownia CF stock build

   Thanks Paulownia from Graham Smith info@paulownianz.co.nz First one I built I made the mistake of not thinning it down enough thru the wrist area. This one worked out much better , the epoxy &...

   Liked On: 28-02-2023, 08:58 PM

8. 
   Fat belly Dog liked post by chainsaw On thread : Another Paulownia CF stock build

   My second effort, this one for a REM Model 7 708. Pretty much copy of Model 7 factory stock but with a longer LOP to suit the shooter (long arms) plus a slightly raised comb and a check swell. ...

   Liked On: 28-02-2023, 08:39 PM

9. 
   Rich007 liked post by chainsaw On thread : Another Paulownia CF stock build

   Hi Rich007 I’m not familiar with Blaser rifles but from memory they have a unique receiver design. I imagine the cut out and fitting of this might be quite tricky.

   Liked On: 28-02-2023, 08:33 PM

10. 
    Scott Cowan liked post by chainsaw On thread : Another Paulownia CF stock build

    Hi Rich007 I’m not familiar with Blaser rifles but from memory they have a unique receiver design. I imagine the cut out and fitting of this might be quite tricky.

    Liked On: 28-02-2023, 11:12 AM

11. 
    Woody liked post by chainsaw On thread : Another Paulownia CF stock build

    My second effort, this one for a REM Model 7 708. Pretty much copy of Model 7 factory stock but with a longer LOP to suit the shooter (long arms) plus a slightly raised comb and a check swell. ...

    Liked On: 28-02-2023, 08:27 AM

12. 
    veitnamcam liked post by chainsaw On thread : Another Paulownia CF stock build

    My second effort, this one for a REM Model 7 708. Pretty much copy of Model 7 factory stock but with a longer LOP to suit the shooter (long arms) plus a slightly raised comb and a check swell. ...

    Liked On: 28-02-2023, 07:00 AM

13. 
    Rich007 liked post by chainsaw On thread : Another Paulownia CF stock build

    Thanks Paulownia from Graham Smith info@paulownianz.co.nz First one I built I made the mistake of not thinning it down enough thru the wrist area. This one worked out much better , the epoxy &...

    Liked On: 28-02-2023, 05:51 AM

14. 
    Chur Bay liked post by chainsaw On thread : Another Paulownia CF stock build

    My second effort, this one for a REM Model 7 708. Pretty much copy of Model 7 factory stock but with a longer LOP to suit the shooter (long arms) plus a slightly raised comb and a check swell. ...

    Liked On: 27-02-2023, 09:36 PM

15. 
    William liked post by chainsaw On thread : Another Paulownia CF stock build

    My second effort, this one for a REM Model 7 708. Pretty much copy of Model 7 factory stock but with a longer LOP to suit the shooter (long arms) plus a slightly raised comb and a check swell. ...

    Liked On: 27-02-2023, 09:11 PM

Page 26 of 184 First ... 121314151617181920212223242526272829303132333435363738394076126 ... Last

• Jump to page: