chainsaw
Member

3716 Likes

Page 19 of 248 First ... 5678910111213141516171819202122232425262728293031323369119 ... Last

• Jump to page:

1. 
   chainsaw liked post by Ranger 888 On thread : Using hard items as rests

   Basically, you want to replicate the rest you use while sighting in, or the point of impact may change.

   Liked On: 02-10-2023, 02:26 PM

2. 
   chainsaw liked post by gimp On thread : 260rem powders & barrel length

   2209 goes good with 140s. Should be near or over 2700 w/ 18 inch and a max load. I'm at 2750 with 147s and 19 inch.

   Liked On: 02-10-2023, 02:25 PM

3. 
   chainsaw liked post by Seventenths On thread : A few hunts

   Mickey, I still miss chasing the sika �� Camera is a Canon SX60 although I’m always looking at getting something better but for now it does the job

   Liked On: 29-09-2023, 04:27 PM

4. 
   chainsaw liked post by Preacher On thread : Rifle Scope

   Yep the 2-10 Burris I got with a rifle off here has impressed me. Is it a high end option? Nope, but it's a maybe $600 scope and works just fine.

   Liked On: 26-09-2023, 09:18 PM

5. 
   chainsaw liked post by ariki On thread : Kaipo river

   Had a 100mm in last three days out of Taupo. You could ring HeliSika and ask how high rivers are.

   Liked On: 26-09-2023, 09:15 PM

6. 
   chainsaw liked post by MB On thread : Russell Sika Deer Eradication

   NRC clearly have nothing better to do than chase down a small herd of deer. Like so many issues these days, this is dogma over outcomes and value for money.

   Liked On: 26-09-2023, 07:08 PM

7. 
   chainsaw liked post by No good names left On thread : Empty brass on plane

   Read this out to Mrs (AvSec) "sounds about right" was the reply :wtfsmilie:

   Liked On: 23-09-2023, 06:04 PM

8. 
   chainsaw liked post by zimmer On thread : Primers to mate

   Just given the last of my old stock of primers to a mate. Check out the 2017 price! 233924

   Liked On: 23-09-2023, 06:01 PM

9. 
   chainsaw liked post by Younghunter123 On thread : Low-vember tahr hunt

   I often drive up the rangitata so could be a option for you guys

   Liked On: 22-09-2023, 08:55 PM

10. 
    chainsaw liked post by lee308 On thread : 260rem powders & barrel length

    41.5 grain of Reloader16 with 140 bullets worked well for my 19inch barrel. stacking holes at 200.

    Liked On: 22-09-2023, 12:28 PM

11. 
    chainsaw liked post by Hayden C On thread : Low-vember tahr hunt

    I have a few trips planned over that period and if the Rangitata was of interest, we can maybe coordinate some flights.

    Liked On: 22-09-2023, 08:56 AM

12. 
    chainsaw liked post by Hayden C On thread : Low-vember tahr hunt

    Jollie still has good numbers, there just a bit scattered and have to put in a few km to get onto them. Rangitata would be the better option though, but you’d almost certainly want to fly in to avoid...

    Liked On: 22-09-2023, 08:47 AM

13. 
    chainsaw liked post by 25/08 IMP On thread : 260rem powders & barrel length

    Yip Hodgdon superproformance and RL26 are my go to powders in the .260 and Creedmoor you can get just over 2800fps from a 18" barrel if using Laupa brass. I use Norma in my son's and can only get...

    Liked On: 20-09-2023, 03:21 PM

14. 
    chainsaw liked post by Ross Nolan On thread : 260rem powders & barrel length

    I've been using 123 sst over 2208 out of a 16" 260. 2760 fps and kills to 540m. That said, it is currently transitioning to a 24" 6.5 SAUM. Mo is mo betta.

    Liked On: 20-09-2023, 03:20 PM

15. 
    chainsaw liked post by Nugget connaisseur On thread : 260rem powders & barrel length

    Superperformance with the 140s will be the go even with 18" barrel. for 2209 ADI says 42 gr book max for 2670fps so that wont do. Im running 41.4 gr of 2209, so 2600 if im lucky with the 18"...

    Liked On: 20-09-2023, 03:20 PM

Page 19 of 248 First ... 5678910111213141516171819202122232425262728293031323369119 ... Last

• Jump to page: