ChrisW
Member

718 Likes

Page 10 of 48 First 123456789101112131415161718192021222324 ... Last

• Jump to page:

1. 
   ChrisW liked post by Kiwi Sapper On thread : Loading .577 snider?

   Rice works well and may be cheaper. As for your projectile..........................who makes that mould?

   Liked On: 26-06-2020, 04:54 PM

2. 
   ChrisW liked post by norsk On thread : Loading .577 snider?

   I have heard that in order to be in maximal accuracy from a Snider you have to have the action bored out and the barrel shank threaded almost up to the block.Since you are going to put a new barrel...

   Liked On: 26-06-2020, 12:38 PM

3. 
   ChrisW liked post by Marty Henry On thread : Loading .577 snider?

   Rolled oats is the best filler I've ever come across. Filling the cavity with something like lube can improve accuracy or have no effect at all. Experimentation, like cats is what sniders are good...

   Liked On: 26-06-2020, 12:38 PM

4. 
   ChrisW liked post by Tasbay On thread : Loading .577 snider?

   I just use 28g shotgun shells shortened to 2 inch loaded with 60gr of homemade black powder and push a .600 round ball on top. Done. The rims are a little to small to eject reliably so just knock...

   Liked On: 25-06-2020, 06:16 PM

5. 
   ChrisW liked post by Kiwi Sapper On thread : Loading .577 snider?

   Starting at the beginning, have you seen these two videos on YouTube. I found them very helpful. https://tinyurl.com/y7v83xc3 https://tinyurl.com/y86sj2u3 Secondly, looking at your brass, I...

   Liked On: 25-06-2020, 06:13 PM

6. 
   ChrisW liked post by norsk On thread : Loading .577 snider?

   The stack you describe will work fine.You can experiment by weighing the amount of filler but it's not a good idea to have to much compression in a bottle necked case as it will increase pressure. ...

   Liked On: 25-06-2020, 05:56 PM

7. 
   ChrisW liked post by zimmer On thread : Loading .577 snider?

   Long time since I fired any of my Sniders. IIRC I used SPANZ brass which was machined from solid stock. I never used substantial loads - my favourite Snider is a Cavalry Carbine. Heavier loads...

   Liked On: 25-06-2020, 05:26 PM

8. 
   ChrisW liked post by norsk On thread : Loading .577 snider?

   The filler is used to take up the air space that *might* cause damage to the gun as the powder burns.Also the theory is that if the powder is lying flat,the sparks from the primer ignite a larger...

   Liked On: 25-06-2020, 05:00 PM

9. 
   ChrisW liked post by rogers.270 On thread : Hardy Hybrid Rifle

   Got one on order - visited the factory.... really excited for it. Communication so far has been excellent. .300PRC and likely to order a 6.5PRC barrel also.

   Liked On: 18-06-2020, 11:35 PM

10. 
    ChrisW liked post by #the creeper On thread : Walnut and blued steel,

    Hey all. After posting some pics of my 7x57, I thought I would share a few more pics CZ 223 FS, 1:9 twist. 142830142831 And it's big brother in 6.5x55 FS 142832142833

    Liked On: 18-06-2020, 03:49 PM

11. 
    ChrisW liked post by 300_BLK On thread : Gun Porn, show off your new toys

    142412 L42A1 clone done, now I need to fit my S&B PMII 10x42 ex sniper and find a leather sling...

    Liked On: 16-06-2020, 09:54 AM

12. 
    ChrisW liked post by Friwi On thread : Tikka T3 & DPT rail.....

    We recommend to use blue locktite on the screws. Usually that does the trick.

    Liked On: 12-06-2020, 08:29 PM

13. 
    ChrisW liked post by zimmer On thread : What in the world?

    That ring you can see will line up nicely with the seperate stub. Section a case end for end for a better view. With a belted case like the 7mm RM it is often better to headspace off the shoulder...

    Liked On: 08-06-2020, 04:42 PM

14. 
    ChrisW liked post by Tikka7mm08 On thread : Gun Porn, show off your new toys

    Big big thanks to Apocalypticaman for getting this wee beauty in 44mag to me for the middle child to add to his Henry 22 and 1866 Uberti 45...

    Liked On: 05-06-2020, 07:39 PM

15. 
    ChrisW liked post by #the creeper On thread : Gun Porn, show off your new toys

    Just been thru a round of redundancys at work....luckily kept my job. So I thought what better way to celebrate than buying a new gun!! Tikka T3x Superlite in 6.5x55. Had a spare set of tikka...

    Liked On: 05-06-2020, 07:21 PM

Page 10 of 48 First 123456789101112131415161718192021222324 ... Last

• Jump to page: