Cooper
Member

52 Likes

Page 1 of 4 1234 Last

• Jump to page:

1. 
   GWH liked post by Cooper On thread : VIDEO: Head shots Only with the 17 Hornet

   Nice shooting! Have been contemplating a 17hmr lately and this doesn't help me resisting the urges

   Liked On: 25-05-2021, 12:54 AM

2. 
   Jhon liked post by Cooper On thread : Zeroing height with a Red Dot on Rossi Puma 92

   Looks like you might have mounted the rail the wrong way around to how it is meant to go, this would aim the rail down and make it shoot high. I would just try turning around the rail and remount...

   Liked On: 18-03-2021, 08:21 AM

3. 
   outlander liked post by Cooper On thread : Zeroing height with a Red Dot on Rossi Puma 92

   Looks like you might have mounted the rail the wrong way around to how it is meant to go, this would aim the rail down and make it shoot high. I would just try turning around the rail and remount...

   Liked On: 18-03-2021, 12:24 AM

4. 
   Mooseman liked post by Cooper On thread : 22 250 Face lift

   Nice rifle, I have just swapped one of mine to the same stock! One possibility that comes to mind is that the brass might be holding tension and need annealing?

   Liked On: 19-02-2021, 08:44 PM

5. 
   Micky Duck liked post by Cooper On thread : Leupold Scopes are NOT worth the money....IMO

   I rate the cheaper 3-9 type Leupolds, they are light weight, have relatively good glass, eye relief and a good warranty.

   Liked On: 14-12-2020, 07:20 PM

6. 
   grunzter liked post by Cooper On thread : Gun Porn, show off your new toys

   This is the latest addition to the collection and really like it so far, bought it as a barreled action and added the oryx stock and made up a bag rider. 26" Howa in 6.5 Creedmoor, have been...

   Liked On: 25-11-2020, 08:55 PM

7. 
   dogmatix liked post by Cooper On thread : Gun Porn, show off your new toys

   This is the latest addition to the collection and really like it so far, bought it as a barreled action and added the oryx stock and made up a bag rider. 26" Howa in 6.5 Creedmoor, have been...

   Liked On: 24-11-2020, 12:48 PM

8. 
   charles23 liked post by Cooper On thread : Gun Porn, show off your new toys

   This is the latest addition to the collection and really like it so far, bought it as a barreled action and added the oryx stock and made up a bag rider. 26" Howa in 6.5 Creedmoor, have been...

   Liked On: 18-11-2020, 12:33 PM

9. 
   Moa Hunter liked post by Cooper On thread : Gun Porn, show off your new toys

   This is the latest addition to the collection and really like it so far, bought it as a barreled action and added the oryx stock and made up a bag rider. 26" Howa in 6.5 Creedmoor, have been...

   Liked On: 11-11-2020, 07:04 PM

10. 
    dannyb liked post by Cooper On thread : To Bushpig or not to Bushpig this is the question what are your thoughts?

    I think the mossbergs are 22" In terms of short and handy I would think 20" with a suppressor on the end is a good place to be, I have used plenty of rifles setup like this and they seem to become...

    Liked On: 29-10-2020, 04:05 AM

11. 
    rugerman liked post by Cooper On thread : 1:8 vs 1:12 in 223

    I would go 1:8, I have found my one shoots cheap 55gr easily under 1moa (Never bought expensive factory .223) and anything I reload is 55gr to 80gr

    Liked On: 24-08-2020, 09:27 AM

12. 
    cameronjackwhite liked post by Cooper On thread : A Rifle for Almost Everything.

    You can do all of this with a 300wsm much easier

    Liked On: 12-08-2020, 01:59 PM

13. 
    grandpamac liked post by Cooper On thread : A Rifle for Almost Everything.

    You can do all of this with a 300wsm much easier

    Liked On: 12-08-2020, 12:47 PM

14. 
    Edunn liked post by Cooper On thread : Pressure Differences - ELD-M and ELD-X

    Currently going through the same thing with trying to find accurate loads for a different bullet in my 7mm Mag and know how easy it is to get caught up in the hunt for speed. I would back it down...

    Liked On: 04-05-2020, 01:03 PM

15. 
    Blair liked post by Cooper On thread : Steating stem

    If you have access to a lathe it is easy enough to just make some new ones. I found with the Lee dies you might have to make the stem longer to get them to work nicely with the design I made. I...

    Liked On: 25-04-2020, 06:40 AM

Page 1 of 4 1234 Last

• Jump to page: