Cordite
Member

2182 Likes

Page 36 of 146 First ... 222324252627282930313233343536373839404142434445464748495086136 ... Last

• Jump to page:

1. 
   Attila liked post by Cordite On thread : Looking for advice on night scopes

   Night vision scopes (non thermal) are relatively inexpensive, most have active near-infrared illumination (the infrared light between the visible spectrum and the heat spectrum) animal eyes are...

   Liked On: 02-03-2021, 06:25 PM

2. 
   Snowgrass liked post by Cordite On thread : Stuck case stuck goodly.

   Snowgrass With that screw jammed in the expander ball has to be high up in the resizing die. Mechanically, if the expander ball is too far up, that is, up in the neck area of the die, then the...

   Liked On: 02-03-2021, 01:07 PM

3. 
   flock liked post by Cordite On thread : Stuck case stuck goodly.

   Snowgrass With that screw jammed in the expander ball has to be high up in the resizing die. Mechanically, if the expander ball is too far up, that is, up in the neck area of the die, then the...

   Liked On: 02-03-2021, 11:55 AM

4. 
   Moa Hunter liked post by Cordite On thread : Whats in your First Aid Kit?

   I forgot, a thin rope ALSO works well as a tourniquet. Apply mild tension and wrap round the bleeding limb until bleeding stops. With mild tension you will spread the pressure over a larger area,...

   Liked On: 24-02-2021, 10:59 PM

5. 
   Ned liked post by Cordite On thread : Whats in your First Aid Kit?

   I read all the above. Tourniquets - are life savers, but note paramedics may give morphine to control the pain they inflict when sufficiently tightened. Wehrmacht / Soviet / Russian style less...

   Liked On: 24-02-2021, 12:13 PM

6. 
   Moa Hunter liked post by Cordite On thread : Whats in your First Aid Kit?

   I read all the above. Tourniquets - are life savers, but note paramedics may give morphine to control the pain they inflict when sufficiently tightened. Wehrmacht / Soviet / Russian style less...

   Liked On: 24-02-2021, 09:43 AM

7. 
   Maca49 liked post by Cordite On thread : Canons?

   "Age restricted video (requested by the uploader)" What a wet towel.

   Liked On: 23-02-2021, 08:16 AM

8. 
   40mm liked post by Cordite On thread : Canons?

   But the .25 is for girls... (

   Liked On: 21-02-2021, 03:14 PM

9. 
   Slug liked post by Cordite On thread : Canons?

   "Age restricted video (requested by the uploader)" What a wet towel.

   Liked On: 21-02-2021, 02:38 PM

10. 
    Marty Henry liked post by Cordite On thread : SHTLE Mark 3 conversion

    Hundreds dollars. Two top wood pieces, one bottom wood piece (both reproductions from somewhere in Oz), middle band if it is missing, hinged band, the front end and a couple special screws to go with...

    Liked On: 20-02-2021, 11:08 AM

11. 
    Valleyhunter liked post by Cordite On thread : SHTLE Mark 3 conversion

    Hundreds dollars. Two top wood pieces, one bottom wood piece (both reproductions from somewhere in Oz), middle band if it is missing, hinged band, the front end and a couple special screws to go with...

    Liked On: 18-02-2021, 11:01 AM

12. 
    T.FOYE liked post by Cordite On thread : Why does pulling case out of FL resizing die require so much force?

    1. Yes, lubrication is necessary for the expander ball. If you don't wash cases afterwards, make sure it's a lubricant that won't interfere with primers. 2. My expander ball travels easier since I...

    Liked On: 17-02-2021, 10:53 PM

13. 
    Tikka7mm08 liked post by Cordite On thread : Why does pulling case out of FL resizing die require so much force?

    1. Yes, lubrication is necessary for the expander ball. If you don't wash cases afterwards, make sure it's a lubricant that won't interfere with primers. 2. My expander ball travels easier since I...

    Liked On: 17-02-2021, 04:17 PM

14. 
    gadgetman liked post by Cordite On thread : Chopping a barrel

    Don't forget the brass round head screw and valve grinding paste.

    Liked On: 17-02-2021, 10:46 AM

15. 
    Preacher liked post by Cordite On thread : Chopping a barrel

    Don't forget the brass round head screw and valve grinding paste.

    Liked On: 16-02-2021, 04:32 PM

Page 36 of 146 First ... 222324252627282930313233343536373839404142434445464748495086136 ... Last

• Jump to page: