Not in those boxes that is new brass loaded hunting ammo, The NRA Fullbore ammo came in White boxes, It is good brass if a bit variable in capacity pay to weigh it into batches and anneal it like...
Liked On: 01-05-2022, 02:24 PM
ANSCHUTZ (lets be honest, the best rimfire manufacturer in the world) has half of their hunting 17hmr at 14”. So wouldn’t worry
Liked On: 30-04-2022, 09:42 AM
I am looking to shorten the barrel on my CZ 455 .17HMR for better front carry ergonomics. The rifle is mounted in a Boyds stock and fitted with a PARD IR 008. The barrel is currently 19" and...
Liked On: 30-04-2022, 09:41 AM
It's pretty easy measurement to take. With the bolt closed, drop a cleaning rod down the barrel, use tape to mark the muzzle, measure length of rod from tape to end.
Liked On: 30-04-2022, 09:12 AM
Suppressors do not increase pressure but do increase the time/pressure curve because they slow the exit of the muzzle gases. This can show as dirty cases in semi-autos but there is usually no...
Liked On: 30-04-2022, 07:48 AM
Have you removed the suppressor and fired the same load to see what happens?
Liked On: 30-04-2022, 07:47 AM
Yes, I've had this problem. I contacted Timney and they knew straight away what the problem was and posted a replacement sear to me. No questions, no cost. Standard trigger... 195614 Timney...
Liked On: 29-04-2022, 06:04 PM
Mine still isn't perfect. Federal 205 primers go off much more reliably than CCI 450's but even they aren't 100% including getting a click on that wallaby headshot in the 7.62x39 subsonic thread. ...
Liked On: 29-04-2022, 06:03 PM
Checked the protrusion, looked the same if not more than my other rifle so don't think that is the problem. Pin tip isn't mushroomed. See pic below though, the firing pin hole is definitely bigger...
Liked On: 29-04-2022, 06:01 PM
I sorted out a preliminary load for my reasonably new 6.5PRC (sub 100 rounds), 53.5grn of H4831sc which is 1.2 grain under Hornady published max. This load showed the best accuracy with 143 grn ELD-x...
Liked On: 29-04-2022, 01:53 PM
That’s worth investigating, also make sure the chamber is clean as lube can build up over time.
Liked On: 29-04-2022, 01:53 PM
Not a single 6.5 calibre on there :XD:
Liked On: 28-04-2022, 07:18 AM
if you look at the old chart.....that makes lots of sense .... I dropped my height at hundy to 2" as find I shoot over top on wallabies if go 3" high...and it makes more sense when I dont often shoot...
Liked On: 28-04-2022, 07:17 AM
All comes down to the person doing the prep and finishing work. I picked up a cheap rifle from somone who had a firm do it and they completely fucked it, sprayed it all inside the action including...
Liked On: 28-04-2022, 12:51 AM
Close quarters Cerokote is ment to be the ducks nuts done a few rifles for a mate of mine he’s quoted mine and his price beats competition for a superior job
Liked On: 27-04-2022, 08:29 PM