dannyb
Unapologetic gun slut

12855 Likes

Page 74 of 857 First ... 246061626364656667686970717273747576777879808182838485868788124174574 ... Last

• Jump to page:

1. 
   dannyb liked post by grandpamac On thread : First attempt at reloading. Thoughts please.

   Greetings Blackfern and Micky Duck, That is pretty good advice from Micky, especially for a bush rifle. For some handloaders the journey of developing a load is just as (or more) important as the...

   Liked On: 24-08-2023, 09:54 AM

2. 
   dannyb liked post by Steelisreal On thread : First attempt at reloading. Thoughts please.

   If you're interested in learning about reloading and ballistics then invest some time in watching some of the Hornady podcasts. It's a great idea to start with 'Your groups are too small' - a useful...

   Liked On: 24-08-2023, 08:06 AM

3. 
   dannyb liked post by blip On thread : Changing a Remmington 700 from .270 to .308

   Just go 30 06, can always down load it to 308

   Liked On: 24-08-2023, 08:02 AM

4. 
   dannyb liked post by Shamus_ On thread : BINO'S Decission

   +1 for the Leupold BX4 binos - pretty nice Japanese made binos, easy on the eyes, and nice and compact

   Liked On: 23-08-2023, 07:45 PM

5. 
   dannyb liked post by bigbear On thread : BINO'S Decission

   SL600 I rate the leupold bx4 binos. My eyes like them. I can bino for hours with no eye strain etc Also any issues the guys at Nz Asia are real good to deal with. The Leupold warranty is worth...

   Liked On: 23-08-2023, 07:43 PM

6. 
   dannyb liked post by longrange308 On thread : First attempt at reloading. Thoughts please.

   Not hot til ya gotta kick the bolt open

   Liked On: 22-08-2023, 11:40 PM

7. 
   dannyb liked post by Chur Bay On thread : First attempt at reloading. Thoughts please.

   41.5 grains looks pretty accurate.

   Liked On: 22-08-2023, 10:03 PM

8. 
   dannyb liked post by Jaco Goosen On thread : Silencer Thread - which is best???

   Pommy is onto it. The diameter of your barrel determines the diameter of your thread. Subtract 1.5mm from your barrels outside diameter at the crown, then go for the next size thread under that...

   Liked On: 22-08-2023, 07:58 PM

9. 
   dannyb liked post by Pommy On thread : Silencer Thread - which is best???

   Yeah the diameter of the barrel is what matters. From a mechanical perspective, the best thread to use is the fattest one you can use that still gives a good shoulder for the suppressor to tighten up...

   Liked On: 22-08-2023, 07:57 PM

10. 
    dannyb liked post by Tahr On thread : 223 on deer

    Read through this thread.

    Liked On: 22-08-2023, 12:28 AM

11. 
    dannyb liked post by Micky Duck On thread : 30-06ai 60 series custom landcruiser build

    no different to a heavy truck..you MAKE SURE you swing wide enough to kink around far enough so you plurry well can see whats coming,do I give a hoot if I take up both lanes to do it??? like heck I...

    Liked On: 21-08-2023, 10:15 PM

12. 
    dannyb liked post by XR500 On thread : Suzuki escudo 4wd help

    [QUOTE=Grey Kiwi;1487429]Very little slipping. It knew what wheel was slipping and reduced power to it (or maybe it was sending that to a wheel that had better grip). Bloody clever stuff anyway....

    Liked On: 21-08-2023, 08:20 PM

13. 
    dannyb liked post by XR500 On thread : 30-06ai 60 series custom landcruiser build

    I really rate those tyres. I have a 20 year old set on my Safari. Numerous punctures and damage etc, but still hold air and hook up nicely when you let loose with all 130hp:o

    Liked On: 21-08-2023, 08:14 PM

14. 
    dannyb liked post by john worthington On thread : Is there anyone that offers heat treating services to amateur knifemakers?

    i can do it for you 0272449151 cheers john

    Liked On: 21-08-2023, 07:25 PM

15. 
    dannyb liked post by viper On thread : Is there anyone that offers heat treating services to amateur knifemakers?

    Take up John's offer , I am lucky enough to have him do my heat treatment and they results are truly outstanding. He takes great pride in hitting the sweet spot with various steels.

    Liked On: 21-08-2023, 07:25 PM

Page 74 of 857 First ... 246061626364656667686970717273747576777879808182838485868788124174574 ... Last

• Jump to page: