Dicko
Member

725 Likes

Page 32 of 49 First ... 1819202122232425262728293031323334353637383940414243444546 ... Last

• Jump to page:

1. 
   Moa Hunter liked post by Dicko On thread : BSA rifle ID help

   It's a Monarch as per the bolt shroud, barrel profile and shape of the forend white line spacer. Got one in the safe here.

   Liked On: 05-07-2021, 08:44 AM

2. 
   bigbear liked post by Dicko On thread : Buffalo Gun Safe

   Big bear, my safe is a different brand but has a 3 point lock system. Mine is a pipe key which are hard blanks to find. Just guessing on your needs...

   Liked On: 03-07-2021, 11:37 PM

3. 
   dogmatix liked post by Dicko On thread : There was a thread on chopping barrel of 270 cal

   Hard loaded you’ll get 2900+fps in a 21. No chance of 2950+ with factory 130 ammo in a short tube or likely even longer ones with most tailor mades . But a 130 at 2850 works a treat!

   Liked On: 30-06-2021, 08:27 PM

4. 
   Phil_H liked post by Dicko On thread : Meat Mincers

   PhilH, I reckon the Italian mincers like Reber have standard size dies and cutters. Replacement parts should be no drama. Try over here, plenty of Italian mincers being sold.

   Liked On: 25-06-2021, 06:33 AM

5. 
   SkiHunt liked post by Dicko On thread : 300 Win Mag Powder Recommendations

   2313sc , rl22 availability’s?

   Liked On: 29-05-2021, 11:45 PM

6. 
   grandpamac liked post by Dicko On thread : Shooting at Medium Range

   For deer size targets I use a 100 mm poi sight at 100 meters. Depending on cartridge / caliber from .35 Whelen bush rifle to .270 win open country fallow gun this gets me to 200 and 275meters dead...

   Liked On: 29-05-2021, 02:33 PM

7. 
   carlhurley liked post by Dicko On thread : Shark Shields

   We have a few GWs here and the abalone divers are the only ones that seem to use a protective device. Not 100% effective as a guy was taken some (10?) years back wearing a shield. After our last...

   Liked On: 26-05-2021, 12:43 PM

8. 
   rugerman liked post by Dicko On thread : 6.5x55 Swede - 130gr vs 140gr tragectory

   In my Swede the following loads all hit the same point of aim at 200 meters. 120 Nosler BTS on 47 gns of 2209 140 Amax on 46 gns of 2209 129 Hornady SP on 47 gns of 2209 i guess the point...

   Liked On: 24-05-2021, 11:14 PM

9. 
   grandpamac liked post by Dicko On thread : 6.5x55 Swede - 130gr vs 140gr tragectory

   In my Swede the following loads all hit the same point of aim at 200 meters. 120 Nosler BTS on 47 gns of 2209 140 Amax on 46 gns of 2209 129 Hornady SP on 47 gns of 2209 i guess the point...

   Liked On: 18-05-2021, 09:44 AM

10. 
    viper liked post by Dicko On thread : Which oversea company to import scope through

    Euro optic have been good in the past.

    Liked On: 12-05-2021, 11:40 AM

11. 
    caberslash liked post by Dicko On thread : Lapping barrels

    With regard to lapping, ShooterNZ is on the money. I’ve had two Remington mountain rifles in 7mm-08 and .280R. Both needed to be bedded and free floated to get them to shoot. They were both fussy...

    Liked On: 27-04-2021, 07:46 PM

12. 
    jackson21 liked post by Dicko On thread : Tikka 270 145eldx load

    jackson21 and @MOA, Now the ranges are open a bit of follow up on a earlier post. I headed out to Malabar range on Saturday check sighing on my target rigs for a upcoming shoot and while there...

    Liked On: 11-04-2021, 03:04 PM

13. 
    Dama dama liked post by Dicko On thread : Desirable features of an all round NZ hunting rifle

    Wood stocks might not rot but after a week in the rain I’ve had them swell considerably so safety’s would function and likely impacted the accuracy. It’s good to take this out of the equation.

    Liked On: 31-03-2021, 05:29 PM

14. 
    WillB liked post by Dicko On thread : Sitka Gear

    hi qyou rock into Cabellas etc there is a absolute shit load of cheap hunting clothes just like the fleece from Ridge line etc that the Ave US deer hunter buys. Kuiu, Sitka etc are selling to the...

    Liked On: 31-03-2021, 03:28 PM

15. 
    ChrisW liked post by Dicko On thread : Problem with brass

    My .02 for what it’s worth. Identify the case that’s the tightest to chamber in your rifle. Use that case to set your FL die. Gradually adjust the die down till it chambers with just minimal force....

    Liked On: 31-03-2021, 08:49 AM

Page 32 of 49 First ... 1819202122232425262728293031323334353637383940414243444546 ... Last

• Jump to page: