Dicko
Member

958 Likes

Page 43 of 64 First ... 2930313233343536373839404142434445464748495051525354555657 ... Last

• Jump to page:

1. 
   Mauser308 liked post by Dicko On thread : Remington 700 sticky bolt dry fire

   If you have just put bases on the action, you may have put the longer screws in the front ring and hitting lugs. If your a new shooter gun someone who is a bit more experienced to have a look.

   Liked On: 24-09-2021, 08:17 PM

2. 
   Moa Hunter liked post by Dicko On thread : Remington 700 sticky bolt dry fire

   If you have just put bases on the action, you may have put the longer screws in the front ring and hitting lugs. If your a new shooter gun someone who is a bit more experienced to have a look.

   Liked On: 22-09-2021, 12:47 AM

3. 
   Micky Duck liked post by Dicko On thread : Remington 700 sticky bolt dry fire

   With the bolt closed and decocked there should be a slight bit of play present. Bolt sledges back and forward a touch. Assuming no gunk in the lug area. If it’s tough to open then bolt handle...

   Liked On: 21-09-2021, 10:51 PM

4. 
   Stag liked post by Dicko On thread : 6.5 284 load info

   https://uploads.tapatalk-cdn.com/20210920/12843f7ffd72d32b2fa5765dce8604db.jpg Here you go.

   Liked On: 21-09-2021, 08:38 PM

5. 
   Stag liked post by Dicko On thread : 6.5 284 load info

   Stag, Yes typo, 48.5 not 58.5! I went up to 50 grains of 2209 and 51 of 2213 with both 140 A max and Berger VLDs. VLDs shot a bit better for me then. 2209 loads were starting to show pressure...

   Liked On: 21-09-2021, 08:37 PM

6. 
   Moa Hunter liked post by Dicko On thread : 6.5 284 load info

   Stag, Yes typo, 48.5 not 58.5! I went up to 50 grains of 2209 and 51 of 2213 with both 140 A max and Berger VLDs. VLDs shot a bit better for me then. 2209 loads were starting to show pressure...

   Liked On: 21-09-2021, 03:43 PM

7. 
   Borris liked post by Dicko On thread : Rounds jamming into lands

   Correct, this is what you should do to set the fls die for your individual rifle.

   Liked On: 20-09-2021, 11:02 PM

8. 
   Danny liked post by Dicko On thread : 6.5 284 load info

   Stag, If my memory is good you went up to about 51.5 gns of 2209 and 53.5 gns of 2213 behind a 140 A max. I pushed up to your loads but they were too hot for me.

   Liked On: 20-09-2021, 11:17 AM

9. 
   Moa Hunter liked post by Dicko On thread : Rounds jamming into lands

   This might be stating the obvious but When checking for length, Don’t feed them from the magazine, feed it by hand gently. When extracting it, try to not let the ejector push it to the side and rub...

   Liked On: 15-09-2021, 05:27 PM

10. 
    grandpamac liked post by Dicko On thread : Rounds jamming into lands

    Correct, this is what you should do to set the fls die for your individual rifle.

    Liked On: 15-09-2021, 05:13 PM

11. 
    Micky Duck liked post by Dicko On thread : Rounds jamming into lands

    This might be stating the obvious but When checking for length, Don’t feed them from the magazine, feed it by hand gently. When extracting it, try to not let the ejector push it to the side and rub...

    Liked On: 15-09-2021, 08:42 AM

12. 
    ONYVA liked post by Dicko On thread : true blue sambar stag

    Cracking stag Rees! Well done. Beautiful big black face, will make a fabulous mount.

    Liked On: 15-09-2021, 07:31 AM

13. 
    veitnamcam liked post by Dicko On thread : Rounds jamming into lands

    This might be stating the obvious but When checking for length, Don’t feed them from the magazine, feed it by hand gently. When extracting it, try to not let the ejector push it to the side and rub...

    Liked On: 15-09-2021, 06:33 AM

14. 
    stagstalker liked post by Dicko On thread : Toyota Hilux - Which Bullbar

    Over the years I had allot and steel bars and collected a few animals, trees and other obstacles. Both have pros and cons. Arb make good bars. You need protection around your lights, would buy a...

    Liked On: 12-09-2021, 12:24 PM

15. 
    Nick-D liked post by Dicko On thread : Show me your knives

    Nick-D, Thanks for the Svord insight. Viper, I’ll send you a pm.

    Liked On: 12-09-2021, 08:33 AM

Page 43 of 64 First ... 2930313233343536373839404142434445464748495051525354555657 ... Last

• Jump to page: