Got both back from Leupold/NIOA today. Just on 2 weeks, so great service and turnaround. Also gave me a new set of lense caps and Allen key after misplacing the last set. Great customer support.
Liked On: 19-07-2021, 10:32 PM
While all the talk here is seating out further, you may find a sweet spot further back that 20 thou off the lands. I.e. more jump.
Liked On: 19-07-2021, 10:10 PM
Some .375’s have a very long action so need to match tube length with mount spacing. On my .375’s I have use fixed 3 and 4 powers and low powered variables 1.5 - 5 and 2-7x leupold mostly.
Liked On: 19-07-2021, 09:09 PM
Some .375’s have a very long action so need to match tube length with mount spacing. On my .375’s I have use fixed 3 and 4 powers and low powered variables 1.5 - 5 and 2-7x leupold mostly.
Liked On: 19-07-2021, 09:04 PM
I’ve sent Leupold, Kahles, Swaro and Zeiss back for repairs. Other brands have often gone into the recycling. It happens, it’s the back up service or not and ease of access that counts. Haven’t sent...
Liked On: 11-07-2021, 10:26 PM
The Charlton rifle was a NZ modification of the SMLE correct?
Liked On: 11-07-2021, 12:35 AM
In the war museum in Canberra you will see Vietnam era SLRs with the barrels shortened and the flash hider sitting just below the gas plug. The heavy barrel SLR designed for full auto bursts is...
Liked On: 10-07-2021, 02:25 AM
It's a Monarch as per the bolt shroud, barrel profile and shape of the forend white line spacer. Got one in the safe here.
Liked On: 05-07-2021, 10:11 AM
It's a Monarch as per the bolt shroud, barrel profile and shape of the forend white line spacer. Got one in the safe here.
Liked On: 05-07-2021, 08:44 AM
Big bear, my safe is a different brand but has a 3 point lock system. Mine is a pipe key which are hard blanks to find. Just guessing on your needs...
Liked On: 03-07-2021, 11:37 PM
Hard loaded you’ll get 2900+fps in a 21. No chance of 2950+ with factory 130 ammo in a short tube or likely even longer ones with most tailor mades . But a 130 at 2850 works a treat!
Liked On: 30-06-2021, 08:27 PM
PhilH, I reckon the Italian mincers like Reber have standard size dies and cutters. Replacement parts should be no drama. Try over here, plenty of Italian mincers being sold.
Liked On: 25-06-2021, 06:33 AM
2313sc , rl22 availability’s?
Liked On: 29-05-2021, 11:45 PM
For deer size targets I use a 100 mm poi sight at 100 meters. Depending on cartridge / caliber from .35 Whelen bush rifle to .270 win open country fallow gun this gets me to 200 and 275meters dead...
Liked On: 29-05-2021, 02:33 PM
We have a few GWs here and the abalone divers are the only ones that seem to use a protective device. Not 100% effective as a guy was taken some (10?) years back wearing a shield. After our last...
Liked On: 26-05-2021, 12:43 PM