Doon
Member

49 Likes

Page 1 of 4 1234 Last

• Jump to page:

1. 
   drunk_mexican liked post by Doon On thread : Show me your lightweight rifle

   242632 Zastava 6.5 Grendel 3.4 kg Rem 700 6x45 3.5 kg

   Liked On: 30-01-2024, 09:04 AM

2. 
   Ground Control liked post by Doon On thread : Show me your lightweight rifle

   242632 Zastava 6.5 Grendel 3.4 kg Rem 700 6x45 3.5 kg

   Liked On: 28-01-2024, 04:33 PM

3. 
   Ground Control liked post by Doon On thread : Tikka 6x45 / 6mm-223

   242618 left to right 75 gn sierria hp 59.2 mm,85 Gameking 59mm,95 gn Targex 62.6 mm 90gn sierria gamechanger 64mm. 223 accurate mag. ruger aics mag, standard tikka 223 mag

   Liked On: 28-01-2024, 11:46 AM

4. 
   Von Gruff Knives liked post by Doon On thread : Various Knives

   Congratulations on your #1000 knife, its a work of art. :thumbs:

   Liked On: 29-10-2023, 12:01 PM

5. 
   6.5 CRD liked post by Doon On thread : Kiwi made Howa mini ultralight chassis a reality?

   28.3 gns of 8208 was the go to in both my Grendels, 20" barrel 2530 fps. 123 sst.

   Liked On: 18-07-2023, 01:21 PM

6. 
   6.5 CRD liked post by Doon On thread : Some thoughts on 6.5 PRC

   I have always respected book max but also would run a ladder, must increments of .3 of a grain would produce say 20-30 fps increase. When you get a sharp increase in velocity you are normally at...

   Liked On: 22-06-2023, 11:55 AM

7. 
   6.5 CRD liked post by Doon On thread : Some thoughts on 6.5 PRC

   Superformance works well for me in the PRC but being a double based powder I backed off a bit for that reason. Theres no such thing as a free lunch. As stated before every rifle is different.

   Liked On: 22-06-2023, 11:54 AM

8. 
   dannyb liked post by Doon On thread : Some thoughts on 6.5 PRC

   Superformance works well for me in the PRC but being a double based powder I backed off a bit for that reason. Theres no such thing as a free lunch. As stated before every rifle is different.

   Liked On: 22-06-2023, 10:54 AM

9. 
   dannyb liked post by Doon On thread : Some thoughts on 6.5 PRC

   I have always respected book max but also would run a ladder, must increments of .3 of a grain would produce say 20-30 fps increase. When you get a sharp increase in velocity you are normally at...

   Liked On: 22-06-2023, 10:53 AM

10. 
    Moa Hunter liked post by Doon On thread : Some thoughts on 6.5 PRC

    I have always respected book max but also would run a ladder, must increments of .3 of a grain would produce say 20-30 fps increase. When you get a sharp increase in velocity you are normally at...

    Liked On: 22-06-2023, 10:51 AM

11. 
    6.5 CRD liked post by Doon On thread : Could any quickload experts run a simulation for me?

    Dont really understand why you would rebarrel a 223 to 222 and run long bullets! In grt you would be lucky to get 2600-2700 and I dont think your brass woud last very long.

    Liked On: 21-06-2023, 05:23 PM

12. 
    FRST liked post by Doon On thread : 1st Wallaby for the young fella

    Was a good weekend, glad your boy got on the talley board. Numbers were very low compared to other trips.

    Liked On: 20-06-2023, 10:54 AM

13. 
    300Shortmag liked post by Doon On thread : 6.5prc

    ADI has load data for ar2225 which is similar to retumbo on there website.

    Liked On: 02-06-2023, 08:21 PM

14. 
    buzzman liked post by Doon On thread : Bergara ba13 ta

    Don’t have a problem with mine 308 16 inch, amazed how well they shoot.

    Liked On: 09-01-2023, 08:05 PM

15. 
    Rated M for Magnum liked post by Doon On thread : Suppressor for 20 inch 6.5 PRC

    I have the the dpt mk 11 mag on my 20" PRC

    Liked On: 28-12-2022, 08:56 PM

Page 1 of 4 1234 Last

• Jump to page: