Depending on the brand, if it’s designed for a 308, it may not be ok on a 270 because it has more powder. If it’s designed for a 30-06 then it’ll be fine on a 270 or smaller. Suppressors are...
Liked On: 30-08-2022, 08:22 PM
Depending on the brand, if it’s designed for a 308, it may not be ok on a 270 because it has more powder. If it’s designed for a 30-06 then it’ll be fine on a 270 or smaller. Suppressors are...
Liked On: 30-08-2022, 08:11 PM
Depending on the brand, if it’s designed for a 308, it may not be ok on a 270 because it has more powder. If it’s designed for a 30-06 then it’ll be fine on a 270 or smaller. Suppressors are...
Liked On: 30-08-2022, 08:03 PM
The diameter of the rear section is dependent on the thread. Mk1 and mk2 are the same. Give us a call on Monday with what thread you have.
Liked On: 28-08-2022, 10:58 PM
The diameter of the rear section is dependent on the thread. Mk1 and mk2 are the same. Give us a call on Monday with what thread you have.
Liked On: 27-08-2022, 06:59 PM
The diameter of the rear section is dependent on the thread. Mk1 and mk2 are the same. Give us a call on Monday with what thread you have.
Liked On: 27-08-2022, 06:35 PM
The diameter of the rear section is dependent on the thread. Mk1 and mk2 are the same. Give us a call on Monday with what thread you have.
Liked On: 27-08-2022, 05:37 PM
At the end of the day people do as they wish with a product, it doesn't mean its recommended by the manufacturer. As far as I know, that issue has not come up. But that would be no different...
Liked On: 14-04-2022, 07:43 AM
Yes. From memory we haven't had any baffles that we haven't been able to disassemble with our suppressor clamps, even suppressors that have not been maintained for years and have had thousands of...
Liked On: 13-04-2022, 10:18 PM
Yes there is a small risk. See bellow another snip from the instructions. This is what we have found works best for our products. During shooting, condensation is created inside the...
Liked On: 13-04-2022, 02:45 PM
Hey, see link for our instructions Suppressor maintenance instructions - DPT Machinists (http://www.dpt.co.nz/cms.php?id_cms=7) This is a snip from the instructions. Your suppressor must be...
Liked On: 13-04-2022, 12:19 PM
Hey, see link for our instructions Suppressor maintenance instructions - DPT Machinists (http://www.dpt.co.nz/cms.php?id_cms=7) This is a snip from the instructions. Your suppressor must be...
Liked On: 13-04-2022, 10:19 AM
Yes. From memory we haven't had any baffles that we haven't been able to disassemble with our suppressor clamps, even suppressors that have not been maintained for years and have had thousands of...
Liked On: 13-04-2022, 06:25 AM
Yes. From memory we haven't had any baffles that we haven't been able to disassemble with our suppressor clamps, even suppressors that have not been maintained for years and have had thousands of...
Liked On: 12-04-2022, 08:55 PM
Yes. From memory we haven't had any baffles that we haven't been able to disassemble with our suppressor clamps, even suppressors that have not been maintained for years and have had thousands of...
Liked On: 12-04-2022, 04:50 PM