DrYopnihc
Member

7 Likes

1. 
   DrYopnihc liked post by Nga On thread : Show me your knives

   A push dagger made from a mix of copper, 1085 and saw mill blade with a 01 core. 245767 245768

   Liked On: 31-03-2024, 08:58 AM

2. 
   DrYopnihc liked post by Nga On thread : Show me your knives

   Custom twist Damascus dagger,. 245268 Large Bowie K110 Steel (D2) 245269

   Liked On: 10-03-2024, 01:45 PM

3. 
   DrYopnihc liked post by Wurzelmangler On thread : Show me your knives

   This weekend just past finished off an Elmax blank I made four+ years ago (Uddeholm Elmax: C 1.7%; Si 0.8%; Mn 0.3%; Cr 18%; Mo 1.0%; V 3.0%). Overall length 243 mm, blade length 120 mm, blade...

   Liked On: 30-03-2023, 09:08 AM

4. 
   DrYopnihc liked post by Von Gruff Knives On thread : Various Knives

   Another of the Tahr Hunters ready to go with the scalloped OD canvas micarta over blaze liners on the 1095 blade with spine jimping in the plain closed top sheath having an attached honing steel. ...

   Liked On: 20-03-2023, 12:17 PM

5. 
   DrYopnihc liked post by Von Gruff Knives On thread : Various Knives

   Early in Jan I was asked if I had thought of a camp hatchet and as it happened I had done one about 35-40 years ago but I made it from and old saw blade and consequently it only weighed 10 oz but the...

   Liked On: 20-03-2023, 12:16 PM

6. 
   DrYopnihc liked post by Hewie On thread : Show me your knives

   Yesterday I did a day knifemaking course with John McDonald of Alba Knives in Hunterville - it was a birthday present from the family. Started off with a heat treated D2 steel blank and ended up with...

   Liked On: 29-10-2022, 01:36 PM

7. 
   DrYopnihc liked post by Remmodel7 On thread : Pre hunt stuff ups

   Went fly fishing in one of the little tekapo lakes. Getting set up. No rod in tube. Shit. Had a rummage around had side cutters, tape and a road atlas. Cut down a willow branch taped on reel. Cut...

   Liked On: 10-03-2021, 04:19 PM