Step eleven Making the inlet moulds Now this bit was theoretically easy, but in practice just about broke me! I’ll get to why that was shortly. Anyway, the idea with this step is to cast a two...
Liked On: 03-06-2021, 10:22 AM
First off, sorry if the images are huge, I am trying to post from my phone and can't work out how to resize them. I have been working on putting a new barrel on this rifle Once I had the old...
Liked On: 02-06-2021, 08:01 AM
So it turns out the barrels are soldered in. I was trying to heat up the barrel shank to break the threads/press fit free and noticed the smell of solder flux and then with a bit more heat, had...
Liked On: 02-06-2021, 07:59 AM
Not my 'new toy', but definitely my favourite!! Anschutz 1771 .223 with a Kahles 3-9x42 scope. Check out the 100m groups with the Sako ammo!! 168102 168103
Liked On: 01-06-2021, 07:49 PM
Years ago cut up a good size venison at the local butchers. We put every thing over the scale and printed the relevant stickers for beef. Think it was close to $700. We still don't buy any meat...
Liked On: 26-05-2021, 10:50 PM
Greeting Gibo, Me too. In my minds eye I can see all this going on while the deer wanders out of sight and very likely dies of old age. Regards Grandpamac.
Liked On: 26-05-2021, 09:19 PM
Il stay under 400yds,still gota go and pick up the deer.Good luck with yr findings Tui4Me.
Liked On: 26-05-2021, 06:51 PM
I'm allergic to Lanolin..... It Causes Involuntary hip thrusts:wtfsmilie: and manic sheep counting when I try too get some sleep......:pacman::):D:thumbsup::ORLY::yaeh am not durnk:
Liked On: 24-05-2021, 02:42 PM
Pays to be a bit careful with reduced shank drills....dont use a precision chuck or hand chuck......the torque going threw it will either tighten it ridiculously (hand chuck) requiring nasty tools to...
Liked On: 21-05-2021, 07:44 PM
A lad with his first deer. A young lad from up the road has been busting for me to take him out for a hunt. He's very keen and has read all the books and watched the vids :) A month ago I had...
Liked On: 20-05-2021, 08:26 PM
Avoid YouShop... that sanctimonious virtue signalling NZ Post owned agency may cause you grief..
Liked On: 18-05-2021, 08:31 PM
I used that method and ended up with a 70cm axe. I’m about 187cm tall
Liked On: 18-05-2021, 06:54 PM
Any good? 167879
Liked On: 17-05-2021, 08:10 PM
I was perusing the 'sale' table at the back of a tool shed style shop in Rotorua last year. Wooden box with about 30 morse taper bits in it, all rusty, in sizes from 10mm to 32mm. "What da ya want...
Liked On: 17-05-2021, 08:10 PM
Good well thought out list there I also went through a stage of trying to get everything as light as possible and for the most part have stuck with it but some items I have gone back the other way...
Liked On: 17-05-2021, 10:37 AM