erniec
Member

2130 Likes

Page 139 of 142 First ... 3989125126127128129130131132133134135136137138139140141142 Last

• Jump to page:

1. 
   erniec liked post by Shamus On thread : Educate me on rangefinders

   A decent set of binos will pretty much last forever if you look after them, an electronic rangefinder less so. I prefer to keep them separate but I am probably in the minority.

   Liked On: 28-07-2018, 08:24 PM

2. 
   erniec liked post by Ryan_Songhurst On thread : Ruger m77 torque settings

   I have never had to re zero a rifle after taking it out of the stockand I take mine out heaps, the scope is attached to the rifle not the stock, do them up firm and job done

   Liked On: 25-07-2018, 04:38 PM

3. 
   erniec liked post by Bagheera On thread : Sighting in a rifle on a short range

   Short range sight in seems to have become a lost art since the days of Matt and Bruce Grant. The cigarette packet at the end of the skid isn't so PC nowadays. The sharpshooter was the bible of nz...

   Liked On: 23-07-2018, 10:01 PM

4. 
   erniec liked post by Puffin On thread : Freshwater pics

   91398

   Liked On: 21-07-2018, 06:48 PM

5. 
   erniec liked post by PerazziSC3 On thread : Relining gun case

   All done. Just waiting on the makers label for the finishing touch on the inside cover 91064 91065 91066 91067

   Liked On: 15-07-2018, 07:24 PM

6. 
   erniec liked post by On thread : SxS recommendations - light farm work,

   Whenever I see sxs I think shotguns :)

   Liked On: 12-07-2018, 09:31 PM

7. 
   erniec liked post by Spanners On thread : Man who shot teen dead in hunting accident 22 years ago loses firearms licence bid

   Not sure about you, but I don’t see photos of dismembered bodies on TV3 news, Facebook, Stuff, the Press or anywhere else in my daily goings. Regardless of the context or how you think it...

   Liked On: 12-07-2018, 08:40 PM

8. 
   erniec liked post by Spanners On thread : Man who shot teen dead in hunting accident 22 years ago loses firearms licence bid

   Pics deleted If you think thats acceptable here, then this isnt the place for you.

   Liked On: 12-07-2018, 06:33 PM

9. 
   erniec liked post by JoshC On thread : Unformed legal road/ Paper Road access

   While realistically a farm owner or manager can refuse access for whatever reason they choose, actually pulling the "because of Health and Safety" card is not a valid excuse to refuse access for...

   Liked On: 09-07-2018, 12:52 PM

10. 
    erniec liked post by PillowDribbler On thread : What the crap?

    Cheech and Chong are the go to for shit identification.

    Liked On: 03-07-2018, 08:55 PM

11. 
    erniec liked post by FRST On thread : Gun Porn, show off your new toys

    Just got my 1952 M70 Supergrade .270 back from Allen Carr- he re-blued it and polished the feed ramp. Very happy with the result.90158 90159

    Liked On: 27-06-2018, 09:23 PM

12. 
    erniec liked post by Smartie On thread : Gun Porn, show off your new toys

    Remington 700 in old fashioned 7mm Rem Mag for open country when the short 308 won't do. Have had this rifle for a while but added the stock this week, I will just leave it as it is for now. I am...

    Liked On: 23-06-2018, 10:28 AM

13. 
    erniec liked post by Tentman On thread : What to put on the end of the barrel?

    Of course if its actually a hunting rifle you could resist the temptation to be a follower of fashion and not use anything - neither are essential or arguably even useful, except perhaps if you have...

    Liked On: 04-06-2018, 09:38 AM

14. 
    erniec liked post by muzr257 On thread : Gun Porn, show off your new toys

    Ruger No1 With a PacNor 6x47 Lapua. I bought the walnut so long ago I cant remember who/how much I paid for it. 88495 88496 This is with the first load that I have tried. 87grn Vmax. Be nice if...

    Liked On: 31-05-2018, 08:50 AM

15. 
    erniec liked post by Preacher On thread : Single shot take down rifle

    Personally I would try find the wood stock and re-shape it as fits you, a lot of "meat" to play with. The shape and finish on them from factory ain't the best and a rasping/sanding and refinishing...

    Liked On: 27-05-2018, 05:42 PM

Page 139 of 142 First ... 3989125126127128129130131132133134135136137138139140141142 Last

• Jump to page: