Recent addition CZ 452 Varmint. Bought a couple of months ago from Hamilton and thanks to mates it made it down last Friday. Whilst in care, Friwi performed his magic & cut barrel to 16" & M18...
Liked On: 24-07-2023, 08:41 PM
Loving this little build.. 6.5 Grendel, 11" carbon barrel, DPT suppressor, Backlanz super light carbon and titanium bipod and Vortex pro rings. The customer is fitting his 1-6 Vortex LPVO scope. ...
Liked On: 04-07-2023, 12:12 AM
I have a short Saum wildcat described in page 4 in here wildcat appreciation thread (https://www.nzhuntingandshooting.co.nz/f53/wildcat-appreciation-thread-95228/index4.html). It's a fair bit of...
Liked On: 26-06-2023, 10:01 PM
Exactly as Eddie Herrick did with two of the official NZ moose. I have one of the loose rounds out of his final Kynoch packet. Copper capped projectile, olde world look.
Liked On: 25-06-2023, 07:21 PM
Mines a simple one no reamer involved at least yet. I got frustrated with a model 7 7mm saum not being able to seat close to lands and fit mag. Barrel came off and chamber was shortened 200...
Liked On: 24-06-2023, 09:49 AM
Here's a nice 375 wildcat 375 Renner Cut a short chamber with standard 375 H&H chamber reamer Make brass from 45-90 which is actually reasonably available Shorten standard 375 H&H sizer die...
Liked On: 18-06-2023, 09:51 PM
I made a lot from 222 brass starting with a 222 neck die then the 20 cal neck, shortened and turned to suit. Enjoyable few hours in the loading room.
Liked On: 18-06-2023, 09:49 PM
226613
Liked On: 17-06-2023, 10:03 PM
Purchased a 375WSM. 300WSM necked up to 375. Working up a load. Should end up with 250gn going about 2500fps out of a 17inch barrel. 226774
Liked On: 17-06-2023, 08:51 AM
Shout out for Colin at Trek nTravel. True good bastard. Can't be beaten for service. If you need any outdoor gear give him a shout. Chur
Liked On: 14-06-2023, 08:45 PM
I have a Kimber Montana 708 shortened to 16" with a Hardy can, Talley one-piece rings and a Swaro Z6 1.7-10 x 42 with a Xmas tree. Also had a half-cock fitted. And a SnipePod. Cant really fault...
Liked On: 07-06-2023, 08:55 PM
Someone with a YT channel who should have FAR more subscribers is young Tasman (NZ Wild Adventures). High quality content, great production skills and actual, proper adventures:thumbsup:
Liked On: 05-06-2023, 01:31 PM
Devcon 10110 2 part epoxy and stainless-steel powder Coloured black Zero shrink, machinable For repairing magnesium gearbox housings on helicopters etc
Liked On: 03-06-2023, 08:34 PM
Good morning, we walked into Hauhungaroa Hut last weekend. The track is pretty rough - the walk took us closer to 5 hrs than 3 hrs. We didn't see a lot of deer sign, but saw heaps of pig rooting.
Liked On: 01-06-2023, 08:00 AM
I had shot the occasional deer in the bush in the past, but I wouldn’t say that stalking had ever been particularly productive. Recently moving to using a pair of binoculars has changed how I feel...
Liked On: 25-05-2023, 10:35 PM