It could be the Colors and the height. You son being seen by that turkey as competing for his damsels.
Liked On: 12-10-2021, 12:31 AM
Easiest option: Start with a factory tikka 300 wsm. You can get mags tweaked to accept the case with bullet seated further out. You will just need a longer bolt stop . If you don't like the .30 cal...
Liked On: 11-10-2021, 05:57 AM
Opinel number 8.
Liked On: 06-10-2021, 02:59 PM
To add to the confusion, some of the European manufacturers are now showing the decibel results from their suppressor measured at the ear. Which of course improved the numbers upward by a few dB. a...
Liked On: 25-09-2021, 11:20 AM
So, we have a model called the mini overbarrel suppressor. Diameter is still 43mm diameter like the normal mk2 range but it goes back only 95mm over the barrel. It has been designed for the smaller...
Liked On: 25-09-2021, 11:10 AM
I have done the maize trick, and I got thousands of pictures of the same possum and the same rat over three months !
Liked On: 22-09-2021, 08:23 AM
I have done the maize trick, and I got thousands of pictures of the same possum and the same rat over three months !
Liked On: 21-09-2021, 08:01 AM
I have done the maize trick, and I got thousands of pictures of the same possum and the same rat over three months !
Liked On: 21-09-2021, 01:30 AM
Slow progress : I have hardened the blade then heat treated at 200c for two hours twice. I presume my oven was not quite at 200c as the steel is still really hard on some parts of it and the file...
Liked On: 20-09-2021, 05:25 PM
Slow progress : I have hardened the blade then heat treated at 200c for two hours twice. I presume my oven was not quite at 200c as the steel is still really hard on some parts of it and the file...
Liked On: 20-09-2021, 05:24 PM
Slow progress : I have hardened the blade then heat treated at 200c for two hours twice. I presume my oven was not quite at 200c as the steel is still really hard on some parts of it and the file...
Liked On: 20-09-2021, 10:21 AM
Slow progress : I have hardened the blade then heat treated at 200c for two hours twice. I presume my oven was not quite at 200c as the steel is still really hard on some parts of it and the file...
Liked On: 20-09-2021, 09:06 AM
Slow progress : I have hardened the blade then heat treated at 200c for two hours twice. I presume my oven was not quite at 200c as the steel is still really hard on some parts of it and the file...
Liked On: 20-09-2021, 08:46 AM
Slow progress : I have hardened the blade then heat treated at 200c for two hours twice. I presume my oven was not quite at 200c as the steel is still really hard on some parts of it and the file...
Liked On: 20-09-2021, 07:34 AM
That is the reason why tuners are used in 22lr bench rest competitions. It is to compensate the variable SD by having a different angle of release of the slow bullets versus the fast bullets so they...
Liked On: 12-09-2021, 02:53 PM