The spring is the same dimensions as a Mauser spring so try advertising for that or contact Graham Chempion
Liked On: 08-02-2023, 11:44 AM
The spring is the same dimensions as a Mauser spring so try advertising for that or contact Graham Chempion
Liked On: 08-02-2023, 11:24 AM
Please put up a picture with the measurements of it. I will get one made for you by a guy in Hastings.
Liked On: 07-02-2023, 01:39 PM
Please put up a picture with the measurements of it. I will get one made for you by a guy in Hastings.
Liked On: 07-02-2023, 07:48 AM
Please put up a picture with the measurements of it. I will get one made for you by a guy in Hastings.
Liked On: 07-02-2023, 06:29 AM
Please put up a picture with the measurements of it. I will get one made for you by a guy in Hastings.
Liked On: 07-02-2023, 05:26 AM
Please put up a picture with the measurements of it. I will get one made for you by a guy in Hastings.
Liked On: 07-02-2023, 04:47 AM
155 A KG AROUND HERE.
Liked On: 04-02-2023, 09:14 AM
The local H and F has all the powders for 155 dollars a kg.
Liked On: 26-01-2023, 05:21 PM
Hi Ryan, I only now use the 130gn Speer and 48 gn of 2209.
Liked On: 18-01-2023, 11:37 PM
Hi Ryan, I only now use the 130gn Speer and 48 gn of 2209.
Liked On: 18-01-2023, 10:32 PM
Take the old pad off and put it on a piece of paper and scribe around it to get the accurate size. Mark the screw holes and then take the drawing to where you are going to buy the pad. I suggest...
Liked On: 09-01-2023, 07:09 AM
Take the old pad off and put it on a piece of paper and scribe around it to get the accurate size. Mark the screw holes and then take the drawing to where you are going to buy the pad. I suggest...
Liked On: 08-01-2023, 11:37 PM
Take the old pad off and put it on a piece of paper and scribe around it to get the accurate size. Mark the screw holes and then take the drawing to where you are going to buy the pad. I suggest...
Liked On: 08-01-2023, 09:43 AM
Take the old pad off and put it on a piece of paper and scribe around it to get the accurate size. Mark the screw holes and then take the drawing to where you are going to buy the pad. I suggest...
Liked On: 08-01-2023, 07:54 AM